Summary for Test 2017-05-02-3-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 8196
DEA: 59912684
Award DateNot set
Closeout DateNot set
Work Description
Location Description

Sample Information

Sample Taken Date05/02/2017 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/03/2017
Sample typeQuality Assurance A brief description of the sample5in Joint Seal
The quantity of what the sample constitutes600ft From where was the sample collectedManufacturer
First name of sampler or witnessed byUnknown Last name of sampler or witnessed bySimon
Title of samplerDavid Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberNA
Inspector Lot Number from the Transportation Laboratory (TL) FormNA Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)1117216
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size5.00

Test Details

DIME Sample ID: 2017-05-02-3
DIME Test ID: 2017-05-02-3-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-05-24

Test Results

Input Type: Measured
Tester's full name: Brian
Date of test: 05/08/2017
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 81.9458 lbs
Width at 4 x Load at W1: 2.17032 in
Nominal Width: 5 in
Measured Maximum Uncompressed Width: 5.2735 in
Measured Minimum Uncompressed Width: 5.0885 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 5.16 in
Height of Contact Face: 5.1315 in
Spec Minimum Uncompressed Width: 5.0885 in
Area (5 Times of the Height of Contact Face): 25.658 sqin
Half of the Spec Minimum Uncompressed Width: 2.58 in
85 Percent of the Spec Minimum Uncompressed Width: 4.32522 in
3 Times of the Area: 76.974 sqin
4 Times of the Load at W1: 327.783 in
W1 (US Units): 4.325 in
W1 (Metric Units): 109.861 millimeters
W2 (US Units): 2.17 in
W2 (Metric Units): 55.126 millimeters
Satisfactory of MR of (US Units): 2.155 in
Satisfactory of MR of (Metric Units): 54.735 millimeters
Optional W1 Measurement 1: 4.3252 in
Optional W1 Measurement 2: 77.4872 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point File
Test graph for 2017-05-02-3-1

Test was verified on 5/17/2017