Summary for Test 2023-08-09-100-7
Test performed: CTM 389-19Project Information
Project Identifiers | Project ID: 215157 DEA: 021H5704 EFIS: 0216000036 |
---|---|
DIST-CO-RTE-PM | 02-SHA-299-67.8/77.8 |
Award Date | 02/09/2023 |
Closeout Date | Not set |
Work Description | BURNEY CAPM - PAVEMENT REHABILITATION |
Location Description | BUNCH GRASS LOOKOUT RD TO NAPA LN |
QA Service Level | 1 (Verified on 09/03/2020) |
Sample Information
Sample Taken Date | 08/09/2023 | Sample Unique Key | 100 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/09/2023 |
Sample type | Production Start-Up | A brief description of the sample | Lime Treated 3/4-inch Type A HMA (eq. PG 64-28 M) with 23.6% RAP and virgin PG 58-34 M binder from Valero (Benicia, CA) |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Randy | Last name of sampler or witnessed by | CGI |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D79315 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | J.F. Shea Construction — Fawndale Rock and Asphalt (Redding, CA) | Transportation Laboratory (TL) Number | 823601 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/4 inch | Lot number | |
Sublot number | HMA Mix Number |
Test Details
DIME Sample ID: 2023-08-09-100
DIME Test ID: 2023-08-09-100-7
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2024-01-26
Test Results
Specified number of passes at 12.7 mm: 15000
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 08/16/2023
Test Temperature: 122 F
HMA Production: Field Plant Produced
Compaction Method: SGC Cylindrical Specimen
Type and Amount of Anti-Stripping Additive: 1.0% Lime
Stripping Inflection Point (Wheel A): >15000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 1.34 mm
Maximum impression at 5000 passes (right wheel): 1.11 mm
Average impression at 5000 passes (left/right avg): 1.23 mm
Maximum impression at 10000 passes (left wheel): 1.54 mm
Maximum impression at 10000 passes (right wheel): 1.33 mm
Average impression at 10000 passes (left/right avg): 1.44 mm
Maximum impression at 15000 passes (left wheel): 1.61 mm
Maximum impression at 15000 passes (right wheel): 1.47 mm
Average impression at 15000 passes (left/right avg): 1.54 mm
Maximum impression at 20000 passes (left wheel): no data
Maximum impression at 20000 passes (right wheel): no data
Average impression at 20000 passes (left/right avg): no data
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
General comments (publicly viewable) (Max 1000 characters): CT 389:
Nf>15000,
SIP>15000;
CT 360:
SA=0.1g/cm²
Test was verified on 1/26/2024 ✔