Summary for Test 2023-08-09-100-3
Test performed: AASHTO T312-14Project Information
| Project Identifiers | Project ID: 215157 DEA: 021H5704 EFIS: 0216000036 |
|---|---|
| DIST-CO-RTE-PM | 02-SHA-299-67.8/77.8 |
| Award Date | 02/09/2023 |
| Closeout Date | Not set |
| Work Description | BURNEY CAPM - PAVEMENT REHABILITATION |
| Location Description | BUNCH GRASS LOOKOUT RD TO NAPA LN |
| QA Service Level | 1 (Verified on 09/03/2020) |
Sample Information
| Sample Taken Date | 08/09/2023 | Sample Unique Key | 100 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/09/2023 |
| Sample type | Production Start-Up | A brief description of the sample | Lime Treated 3/4-inch Type A HMA (eq. PG 64-28 M) with 23.6% RAP and virgin PG 58-34 M binder from Valero (Benicia, CA) |
| The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Randy | Last name of sampler or witnessed by | CGI |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D79315 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | J.F. Shea Construction — Fawndale Rock and Asphalt (Redding, CA) | Transportation Laboratory (TL) Number | 823601 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-08-09-100
DIME Test ID: 2023-08-09-100-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)
Test Release Date: 2024-01-26
Test Results
HMA Type: Type A HMA
Is this test used for JMF verification: No
Input Type: Measured
Tester's full name: Colt Sweeny and Josh Murphy
Date of test: 08/10/2023
Start time of test (military time): 0851
Specimen identification: 1081001
Percent Binder Content: 4.7 %
Average diameter of the mold: 150 mm
Height of the extruded specimen (Hm): 116.3 mm
Height of the specimen after 8 gyrations: 130.2 mm
Height of the specimen after 85 gyrations: 117.8 mm
Height of the specimen after 130 gyrations: 116.3 mm
Mass of the specimen: 4896.8 g
Maximum Specific Gravity (Gmm): 2.563
Bulk Specific Gravity (Gmb): 2.477
Unit weight of water: 1 g/cm^3
Gyration Angle: 1.16 deg
Gyration Angle: 20.2 mrad
Method used to verify gyration angle: AASHTO T 344 at room temperature
Volume of the specimen (Vm8): 2299.657 cm^3
Volume of the specimen (Vm85): 2080.643 cm^3
Volume of the specimen (Vm130): 2054.149 cm^3
Uncorrected relative density (Gmmu8): 83.1 %
Uncorrected relative density (Gmmu85): 91.8 %
Uncorrected relative density (Gmmu130): 93.0 %
Relative density (Gmm8): 86.3 %
Relative density (Gmm85): 95.4 %
Relative density (Gmm130): 96.6 %
Air Voids (AV8): 13.7 %
Air Voids (AV85): 4.6 %
Air Voids (AV130): 3.4 %
General comments (publicly viewable) (Max 1000 characters): AASHTO T 312:
%Gmm8=86.3,
%Gmm85=95.4,
%Gmm130=96.7;
CT 366: S=42
Test was verified on 1/26/2024 ✔