Summary for Test 2023-09-22-100-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 994617 DEA: 112N1664 EFIS: 1122000153 |
---|---|
DIST-CO-RTE-PM | 11-SD-79-44.7/53.0 |
Award Date | 05/18/2023 |
Closeout Date | Not set |
Work Description | COLD PLANE, RHMA OVERLAY, PAVEMENT MARKING, & RUMBLE STRIP. |
Location Description | SAN DIEGO COUNTY NEAR SUNSHINE SUMMIT FROM 1.2 MILES NORTH OF ACORN CREEK BRIDGE TO RIVERSIDE COUNTY LINE |
QA Service Level | 1 (Verified on 11/30/2023) |
Sample Information
Sample Taken Date | 09/22/2023 | Sample Unique Key | 100 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/27/2023 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" RHMA-O |
The quantity of what the sample constitutes | 2 boxes 1 bag | From where was the sample collected | Source |
First name of sampler or witnessed by | Jesse | Last name of sampler or witnessed by | Fuentes |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 9607-A | Linked DIME Sample ID | 2023-09-22-99 |
The fabricator/manufacturer/facility name | Martin Marietta | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | N/A |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-09-22-100
DIME Test ID: 2023-09-22-100-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-01-05
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Daniel Smith / J Seymour
Date of test: 01/02/2024
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
5380 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
247.0 grams | 95 % | |||||
1631.0 grams | 70 % | |||||
2572.0 grams | 52 % | |||||
2977.0 grams | 45 % | |||||
501.2 grams | ||||||
127.0 grams | 34 % | |||||
240.7 grams | 23 % | |||||
323.6 grams | 16 % | |||||
384.7 grams | 10 % | |||||
417.0 grams | 8 % | |||||
435.8 grams | 5.9 % | |||||
436.2 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/5/2024 ✔