Summary for Test 2023-08-07-90-1
Test performed: AASHTO T308-10Project Information
Project Identifiers | Project ID: 215157 DEA: 021H5704 EFIS: 0216000036 |
---|---|
DIST-CO-RTE-PM | 02-SHA-299-67.8/77.8 |
Award Date | 02/09/2023 |
Closeout Date | Not set |
Work Description | BURNEY CAPM - PAVEMENT REHABILITATION |
Location Description | BUNCH GRASS LOOKOUT RD TO NAPA LN |
QA Service Level | 1 (Verified on 09/03/2020) |
Sample Information
Sample Taken Date | 08/07/2023 | Sample Unique Key | 90 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/07/2023 |
Sample type | Production Start-Up | A brief description of the sample | 1 bag of Combined RAP (3/8-inch) |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D79307B | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | J.F. Shea Construction — Fawndale Rock and Asphalt (Redding, CA) | Transportation Laboratory (TL) Number | 857939 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Reclaimed Asphalt Pavement | RAP Source | Fawndale Rock and Asphalt, Redding, CA |
---|---|---|---|
Aggregate Size | 3/8-inch | Aggregate Source | |
RAP Stockpile | Stockpile Size (tons) | ||
Reclaimed Asphalt Pavement Mix Number |
Test Details
DIME Sample ID: 2023-08-07-90
DIME Test ID: 2023-08-07-90-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2023-12-28
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Joe Mishoe and Sean McWithey
Date of test: 08/10/2023
Test procedure used?: Method A
Mass of the specimen basket assembly: 3061.9 g
Mass of the specimen and specimen basket assembly prior to ignition: 4635.9 g
Mass of HMA Sample prior to ignition: 1574.0 g
Mass Loss: 84.1 g
Mass of aggregate remaining after ignition: 1489.9 g
Correction Factor (Percent by mass of HMA Specimen): 0.00 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.19 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 5.15 %
General comments (publicly viewable) (Max 1000 characters): Pbr(uncorrected)=5.15%
Pbr≈4.40%
Test was verified on 12/28/2023 ✔