Summary for Test 2023-12-11-22-2
Test performed: AASHTO T308-10Project Information
Project Identifiers | Project ID: 993905 DEA: 034H5814 EFIS: 0320000240 |
---|---|
DIST-CO-RTE-PM | 03-SAC-5-27.6/29.5,30.4/34.3 |
Award Date | 02/28/2023 |
Closeout Date | Not set |
Work Description | ROADWAY EXCAVATION, PLACE CL2 AB, HMA & RHMA, & MODIFY RAMP METERS. |
Location Description | SACRAMENTO COUNTY IN AND NEAR SACRAMENTO FROM 0.5 MILES SOUTH OF ARENA BOULEVARD OVERCROSSING TO 0.4 MILES SOUTH OF 99/5 INTERCHANGE AND FROM 0.5 MILES NORTH OF THE 99/5 INTERCHANGE TO 0.4 MILE SOUTH OF THE YOLO COUNTY LINE |
QA Service Level | 1 (Verified on 06/27/2022) |
Sample Information
Sample Taken Date | 12/11/2023 | Sample Unique Key | 22 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 12/12/2023 |
Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA w/ 25% RAP |
The quantity of what the sample constitutes | 2 HMA Boxes | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Mark | Last name of sampler or witnessed by | Mahoney |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | DeSilva Gates Construction | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/4 inch | Lot number | 1 |
Sublot number | 10 | HMA Mix Number |
Test Details
DIME Sample ID: 2023-12-11-22
DIME Test ID: 2023-12-11-22-2
Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2023-12-21
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: KHUE YANG
Date of test: 12/18/2023
Test procedure used?: Method A
Mass of the specimen basket assembly: 3944.7 g
Mass of the specimen and specimen basket assembly prior to ignition: 6001.2 g
Mass of HMA Sample prior to ignition: 2056.5 g
Mass Loss: 117.0 g
Mass of aggregate remaining after ignition: 1939.5 g
Correction Factor (Percent by mass of HMA Specimen): 0.51 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.00 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 5.18 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/21/2023 ✔