Summary for Test 2017-04-10-8-1
Test performed: ASTM A370-15Project Information
Project Identifiers | Project ID: 8196 DEA: 59912684 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | |
Location Description | |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 04/10/2017 | Sample Unique Key | 8 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/18/2017 |
Sample type | Quality Assurance | A brief description of the sample | F1554 Anchor Rods Nuts Washers |
The quantity of what the sample constitutes | 7 | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Prakash | Last name of sampler or witnessed by | Patel |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | A M Nut and Bolt | Transportation Laboratory (TL) Number | NA |
Inspector Lot Number from the Transportation Laboratory (TL) Form | L1103617 | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
---|---|---|---|
Heat Number(s) | 306685 3064798 3066882 | Nut Mfg. Lot Number(s) | 358843A DDSR 383997A |
Washer Mfg. Lot Number(s) | 297736 32545 299482 | Bolt Specification | F1554 |
Bolt Length(s) | 30", 42", 36,' | Nut Specification | A194 2H |
Washer Specification | F436 | Finish | A153 HDG |
Diameter/Size | .75, 1.75, 1 | Bolt Mfg. Lot Number | NA |
Rocap Test Requirement(s) | Lubricant Requirements(s) |
Test Details
DIME Sample ID: 2017-04-10-8
DIME Test ID: 2017-04-10-8-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2017-04-28
Test Results
Number of Samples: 6
Input Type: Calculated
Tester's full name: Fred
Date of test: 04/20/2017
UTM: 67KIP
Temperature: 72 F
Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
---|---|---|---|---|---|---|---|---|
1 | 3066885 | 0.494 | 0.1917 | 69725 | 93750 | 26.2 | Fred | |
2 | 3066885 | 0.493 | 0.1909 | 69971 | 93470 | 27.5 | Fred | |
3 | 3066882 | 0.496 | 0.1932 | 67236 | 92400 | 27.5 | Fred | |
4 | 3066882 | 0.495 | 0.1924 | 68638 | 92460 | 26.3 | Fred | |
5 | 3064798 | 0.496 | 0.1932 | 65574 | 92260 | 26.5 | Fred | |
6 | 3064798 | 0.496 | 0.1932 | 65277 | 92110 | 27.8 | Fred |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 4/21/2017 ✔