Summary for Test 2017-04-10-7-86
Test performed: ASTM A370-15Project Information
Project Identifiers | Project ID: 8196 DEA: 59912684 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | |
Location Description | |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 04/10/2017 | Sample Unique Key | 7 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/18/2017 |
Sample type | Quality Assurance | A brief description of the sample | F1554 Anchor Rods Nut Washers |
The quantity of what the sample constitutes | 33 | From where was the sample collected | Distributor |
First name of sampler or witnessed by | Prakash | Last name of sampler or witnessed by | Patel |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | A M Nut Bolt | Transportation Laboratory (TL) Number | NA |
Inspector Lot Number from the Transportation Laboratory (TL) Form | L1103617 | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
---|---|---|---|
Heat Number(s) | Nut Mfg. Lot Number(s) | 358843B, 381629A, 371114A | |
Washer Mfg. Lot Number(s) | 297736, 299272, 258008 | Bolt Specification | Grade 55 |
Bolt Length(s) | .75"- x 18", 1"- x 40", .875"- X 12" | Nut Specification | A194 2H |
Washer Specification | F436 | Finish | F2329 |
Diameter/Size | .75, 1, .875 | Bolt Mfg. Lot Number | 3066885, 58020878-04, 3066884 |
Rocap Test Requirement(s) | Lubricant Requirements(s) |
Test Details
DIME Sample ID: 2017-04-10-7
DIME Test ID: 2017-04-10-7-86
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2017-04-28
Test Results
Number of Samples: 6
Input Type: Calculated
Tester's full name: Fred
Date of test: 04/20/2017
UTM: 67KIP
Temperature: 72 F
Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
---|---|---|---|---|---|---|---|---|
1 | 3066885 | 0.497 | 0.194 | 69077 | 93360 | 25.3 | Fred | |
2 | 3066885 | 0.495 | 0.1924 | 70048 | 93500 | 26.5 | Fred | |
3 | 58020878 | 0.497 | 0.194 | 131292 | 142910 | 19.5 | Fred | |
4 | 58020878 | 0.497 | 0.194 | 131400 | 143190 | 19.8 | Fred | |
5 | 3066884 | 0.351 | 0.0968 | 71702 | 95350 | 29.6 | Fred | |
6 | 3066884 | 0.35 | 0.0962 | 0 | 95010 | 27.6 | Fred |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 4/21/2017 ✔