Summary for Test 2023-12-12-29-1
Test performed: AASHTO T308-10Project Information
Project Identifiers | Project ID: 994102 DEA: 11430644 EFIS: 1119000045 |
---|---|
DIST-CO-RTE-PM | 11-SD-905-12.0 |
Award Date | 10/28/2022 |
Closeout Date | Not set |
Work Description | CONSTRUCT WEIGH-IN-MOTION FACILITY, CRCP, HMA, AND RETAINING WALL. |
Location Description | SAN DIEGO COUNTY NEAR SAN DIEGO AT OTAY MESA COMMERCIAL VEHICLE ENFORCEMENT FACILITY |
QA Service Level | 1 (Verified on 08/24/2022) |
Sample Information
Sample Taken Date | 12/12/2023 | Sample Unique Key | 29 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/13/2023 |
Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA PSU |
The quantity of what the sample constitutes | 12 boxes 3 bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Jesse | Last name of sampler or witnessed by | Fuentes |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 8315-PSU | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/4 inch | Lot number | |
Sublot number | HMA Mix Number | 220817 Otay Val |
Test Details
DIME Sample ID: 2023-12-12-29
DIME Test ID: 2023-12-12-29-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2024-01-17
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Daniel Smith / J Seymour
Date of test: 12/14/2023
Test procedure used?: Method A
Mass of the specimen basket assembly: 4025.1 g
Mass of the specimen and specimen basket assembly prior to ignition: 6058.7 g
Mass of HMA Sample prior to ignition: 2033.6 g
Mass Loss: 107.8 g
Mass of aggregate remaining after ignition: 1925.8 g
Correction Factor (Percent by mass of HMA Specimen): 0.56 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.00 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 4.74 %
General comments (publicly viewable) (Max 1000 characters): Target 4.7% / -.3 to +.5
Test was verified on 1/17/2024 ✔