Summary for Test 2023-09-08-63-2

Test performed: AASHTO T308-10

Project Information

Project IdentifiersProject ID: 994645
DEA: 041W8604
EFIS: 0421000102
DIST-CO-RTE-PM04-SM-35,280-L22.0/31.5,R19.0/R19.3
Award Date05/24/2023
Closeout Date05/03/2024
Work DescriptionCOLD PLANE ASPHALT CONCRETE PAVEMENT AND PLACE HOT MIX ASPHALT.
Location DescriptionSAN MATEO COUNTY FROM 0.5 MILE NORTH OF LARKSPUR DRIVE UNDERCROSSING IN SAN BRUNO TO CITY AND COUNTY OF SAN FRANCISCO COUNTY LINE IN DALY CITY
QA Service Level1 (Verified on 05/09/2023)

Sample Information

Sample Taken Date09/08/2023 Sample Unique Key63
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/11/2023
Sample typeProduction Start-Up A brief description of the sample3/4 HMA + 25% RAP
The quantity of what the sample constitutes750 Tons From where was the sample collectedSupplier
First name of sampler or witnessed byLEONARDO Last name of sampler or witnessed byMENDOZA
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite Construction - Santa Clara Transportation Laboratory (TL) NumberC666428
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number1
Sublot number1 HMA Mix NumberD04 JMF 23 023

Combined Gradation Report Information

Combined Gradation Report IdBin IndexDime Test Id
No assigned tests for this sample.

Test Details

DIME Sample ID: 2023-09-08-63
DIME Test ID: 2023-09-08-63-2
Testing Lab: CT D04 - Hayward Field Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2023-12-18

Test Results


What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Leonardo Mendoza
Date of test: 09/09/2023
Test procedure used?: Method A
Mass of the specimen basket assembly: 3102.5 g
Mass of the specimen and specimen basket assembly prior to ignition: 5155.7 g
Mass of HMA Sample prior to ignition: 2053.2 g
Mass Loss: 124.6 g
Mass of aggregate remaining after ignition: 1928.6 g
Correction Factor (Percent by mass of HMA Specimen): 1.11 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.09 %
Test Temperature: 4982 C
Corrected Asphalt Binder Content: 4.87 %
General comments (publicly viewable) (Max 1000 characters): Asphalt Content #2

Test was verified on 12/18/2023