Summary for Test 2023-11-10-46-11
Test performed: AASHTO T30-19Project Information
Project Identifiers | Project ID: 993529 DEA: 11430514 EFIS: 1119000008 |
---|---|
DIST-CO-RTE-PM | 11-SD-15-R31.3/R37.1 |
Award Date | 05/27/2022 |
Closeout Date | Not set |
Work Description | CRCP, FIBER OPTIC CABLE, AND HMA. |
Location Description | SAN DIEGO COUNTY IN AND NEAR ESCONDIDO FROM 0.2 MILE SOUTH OF ROUTE 15/78 SEPARATION TO 0.5 MILE NORTH OF DEER SPRINGS ROAD OVERCROSSING |
QA Service Level | 1 (Verified on 02/07/2022) |
Sample Information
Sample Taken Date | 11/10/2023 | Sample Unique Key | 46 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/13/2023 |
Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA PSU |
The quantity of what the sample constitutes | 12 boxes 3 bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Jesse | Last name of sampler or witnessed by | Fuentes |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 6634-PSU | Linked DIME Sample ID | 2023-11-10-45 |
The fabricator/manufacturer/facility name | Martin Marietta | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0098 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Combined Gradation Report Information
Combined Gradation Report Id | Bin Index | Dime Test Id |
---|---|---|
No assigned tests for this sample. |
Test Details
DIME Sample ID: 2023-11-10-46
DIME Test ID: 2023-11-10-46-11
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2023-11-30
Test Results
Does this test use 1/4 sieve?: No
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Daniel Smith
Date of test: 11/22/2023
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
1585.1 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
26.2 grams | 98 % | |||||
448.1 grams | 72 % | |||||
741.0 grams | 53 % | |||||
951.9 grams | 40 % | |||||
1107.2 grams | 30 % | |||||
1238.3 grams | 22 % | |||||
1341.2 grams | 15 % | |||||
1415.5 grams | 10.7 % |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/30/2023 ✔