Summary for Test 2023-10-30-47-4
Test performed: AASHTO T313-22
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
Project Identifiers | Project ID: 994264 DEA: 010H20U4 EFIS: 0122000085 |
---|---|
DIST-CO-RTE-PM | 01-HUM-101-77.3/79.5 |
Award Date | 12/15/2022 |
Closeout Date | Not set |
Work Description | Project Name: 5th Street Combine (Description of Work: Minor Concrete, Modify Signal and HMA) |
Location Description | HUMBOLDT COUNTY IN EUREKA AT VARIOUS LOCATIONS FROM MCCULLENS AVENUE TO 0.1 MILE NORTH OF V STREET AND WEST AVENUE NORTHBOUND |
QA Service Level | 1 (Verified on 09/29/2022) |
Sample Information
Sample Taken Date | 10/30/2023 | Sample Unique Key | 47 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/06/2023 |
Sample type | Department Acceptance | A brief description of the sample | 1 can of PG 58-22 binder |
The quantity of what the sample constitutes | 1 can of binder | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Jayce | Last name of sampler or witnessed by | Brown |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | 23-318 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Mercer Fraser Plant B | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 58-22 |
---|---|---|---|
Modified | No | Lot number | |
Sublot number | Tank number | ||
Time of sample | HMA Supplier | Mercer Fraser Plant B | |
Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
Multigrade Type | Asphalt Binder Mix Number |
Test Details
DIME Sample ID: 2023-10-30-47
DIME Test ID: 2023-10-30-47-4
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2023-11-21
Test Results
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 11/21/2023
Minimum test bath temperature at 240 s: -12.0 C
Maximum test bath temperature at 240 s: -11.9 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 0.0 mN
Beam deflection 60.0 s: 0.000 µm
Measured Stiffness Modulus 60.0 s: 113.000 mPa
Estimated Stiffness Modulus 60.0 s: 113.000 mPa
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.311
General comments (publicly viewable) (Max 1000 characters): BBR
Test was verified on 11/21/2023 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.