Summary for Test 2023-10-17-68-1

Test performed: AASHTO T315-22

Project Information

Project IdentifiersProject ID: 994534
DEA: 010H1604
EFIS: 0117000117
DIST-CO-RTE-PM01-MEN-101-R33.7/R43.2
Award Date05/04/2023
Closeout DateNot set
Work DescriptionREPLACE AC SURFACING, PLACE HMA-A, RHMA-G & CONCRETE BARRIER.
Location DescriptionMENDOCINO COUNTY NEAR WILLITS FROM 1.1 MILES NORTH OF WEST ROAD OVERCROSSING TO 0.6 MILE SOUTH OF HAEHL CREEK BRIDGE
QA Service Level1 (Verified on 04/25/2023)

Sample Information

Sample Taken Date10/17/2023 Sample Unique Key68
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/24/2023
Sample typeDepartment Acceptance A brief description of the samplepg 64-16
The quantity of what the sample constitutes1 of 1 can From where was the sample collectedJob Site
First name of sampler or witnessed byriley Last name of sampler or witnessed bymelvin
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameGarco Transportation Laboratory (TL) Numberc 033185
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-16
Modified Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade Type Asphalt Binder Mix Number

Test Details

DIME Sample ID: 2023-10-17-68
DIME Test ID: 2023-10-17-68-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2023-11-15

Test Results


Phase: Original binder
Input Type: Measured
Tester's full name: Humberto Ramirez
Date of test: 11/13/2023
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.162 kPa
Phase Angle (δ) (for the 10 cycles): 85.2 degree
Complex Modulus (G*) (for the 10 measurements): 1.343 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.35 kPa
General comments (publicly viewable) (Max 1000 characters): OG

Test was verified on 11/15/2023