Summary for Test 2023-10-17-26-2
Test performed: ASTM C39-21Project Information
| Project Identifiers | Project ID: 994330 DEA: 09366404 EFIS: 0916000006 |
|---|---|
| DIST-CO-RTE-PM | 09-MNO-395-58.2/60.4 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | HOT MIX ASPHALT (TYPE A), IMPORTED BORROW, AND ROADWAY EXCAVATION. |
| Location Description | MONO COUNTY ABOUT 6 MILES NORTH OF LEE VINING FROM ROUTE 167 TO 0.4 MILE NORTH OF CONWAY RANCH ROAD |
| QA Service Level | 1 (Verified on 07/31/2023) |
Sample Information
| Sample Taken Date | 10/17/2023 | Sample Unique Key | 26 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/18/2023 |
| Sample type | Quality Assurance | A brief description of the sample | 5000 Psi Mix / Mammoth |
| The quantity of what the sample constitutes | 13 Cubic Yards / Mammoth Ready Mix | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Jeffery | Last name of sampler or witnessed by | Puente |
| Title of sampler | QA | Telephone number of sampler | 6614400636 |
| Laboratory sample identification | Conc-04 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Mammoth Ready Mix | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Concrete | The concrete mix design number | 1304.18.25.A |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | 58900 | |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | DS-1 Headwall Inlet | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-10-17-26
DIME Test ID: 2023-10-17-26-2
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: ASTM C39-21: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2023-11-14
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Measured
Tester's full name: Derek Carrington
Date of test: 11/14/2023
Apparent mass of submerged cylinder 1: 3.5 lb
Average diameter of cylinder 1: 4.00 in
Average diameter of cylinder 2: 4.00 in
Average diameter of cylinder 3: 4.00 in
Maximum load on cylinder 1: 64955 lb
Maximum load on cylinder 2: 64740 lb
Maximum load on cylinder 3: 66285 lb
Type of fracture pattern of cylinder 1: 1
Type of fracture pattern of cylinder 2: 1
Type of fracture pattern of cylinder 3: 1
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Correction factor for cylinder 3: 1.00
Age of specimen: 0 days
Age of specimen in hours: 0 hours
Cross sectional area of cylinder 1: 12.57 in^2
Cross sectional area of cylinder 2: 12.57 in^2
Cross sectional area of cylinder 3: 12.57 in^2
Compressive strength of cylinder 1: 5170.0 psi
Compressive strength of cylinder 2: 5150.0 psi
Compressive strength of cylinder 3: 5270 psi
Compressive strength (to nearest 10 psi): 5200 psi
Serial number of delivery ticket, if available: no data
General comments (publicly viewable) (Max 1000 characters): PCC-04
Test was verified on 11/14/2023 ✔