Summary for Test 2023-07-10-71-3
Test performed: CTM 212-May 2010Project Information
Project Identifiers | Project ID: 993339 DEA: 024H9304 EFIS: 0219000027 |
---|---|
DIST-CO-RTE-PM | 02-SHA-299-44.3/44.9 |
Award Date | 07/13/2022 |
Closeout Date | 04/11/2024 |
Work Description | INGOT CURVE IMPROVEMENT - CURVE IMROVEMENT |
Location Description | IN SHASTA COUNTY NEAR INGOT FROM 2.7 MILES EAST OF SEAMANS GULCH ROAD TO 1.2 MILES WEST OF DU BOIS ROAD. |
QA Service Level | 1 (Verified on 11/22/2021) |
Sample Information
Sample Taken Date | 07/10/2023 | Sample Unique Key | 71 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/10/2023 |
Sample type | Acceptance | A brief description of the sample | 3 bags of Shoulder Backing |
The quantity of what the sample constitutes | Entire Project | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | D79289 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Bear Gulch Quarry | Transportation Laboratory (TL) Number | 858122 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0023 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Stockpile | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-07-10-71
DIME Test ID: 2023-07-10-71-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 212-May 2010: Method of Test for Unit Weight of Aggregate
Test Release Date: 2023-11-06
Test Results
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 07/19/2023
Weight of water in the measure: 21.053 lbm
Water temperature: 73 deg F
Tare weight of empty measure: 12.973 lbm
Weight of measure filled with aggregate (test 1): 48.267 lbm
Weight of measure filled with aggregate (test 2): 47.495 lbm
Weight of measure filled with aggregate (test 3): 48.167 lbm
Water density: 62.28 lbf/ft^3
Factor F: 2.96 ft^-3
Net weight of aggregate in measure (test 1): 35.29 lbm
Net weight of aggregate in measure (test 2): 34.52 lbm
Net weight of aggregate in measure (test 3): 35.19 lbm
Average net weight of aggregate required to fill the measure: 35 lbm
Aggregate unit weight: 103.54 lbf/ft^3
General comments (publicly viewable) (Max 1000 characters): UW≈104pcf
Test was verified on 11/6/2023 ✔