Summary for Test 2023-10-27-49-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 214135 DEA: 09213404 EFIS: 0900000030 |
---|---|
DIST-CO-RTE-PM | 09-INY-395-29.9/41.8 |
Award Date | 10/22/2021 |
Closeout Date | Not set |
Work Description | ROADWAY EXCAVATION, PLACE HMA (TYPE A), AND ALTERNATIVE PIPE CULVERT. |
Location Description | INYO COUNTY NEAR OLANCHA AND CARTAGO FROM 1.4 MILES SOUTH OF LOS ANGELES AQUEDUCT BRIDGE TO 0.2 MILE SOUTH OF ASH CREEK BRIDGE |
QA Service Level | 1 (Verified on 05/03/2019) |
Sample Information
Sample Taken Date | 10/27/2023 | Sample Unique Key | 49 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/03/2023 |
Sample type | Department Acceptance | A brief description of the sample | 1x#4 CA & ConSand |
The quantity of what the sample constitutes | 1 Bag of ConAgg & 1 Bag of ConSand | From where was the sample collected | Source |
First name of sampler or witnessed by | Dustin | Last name of sampler or witnessed by | Fox |
Title of sampler | QC | Telephone number of sampler | |
Laboratory sample identification | CA-10-27 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | 7/11 Ridgecrest | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 00-00-0000 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt Samples at Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
The concrete mix design number | 750216A6 | Lot number | |
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-10-27-49
DIME Test ID: 2023-10-27-49-1
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-11-03
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Derek Carrington
Date of test: 11/03/2023
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
7500 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
1703.3 grams | 77 % | |||||
5480.4 grams | 27 % | |||||
6772.2 grams | 10 % | |||||
7246.2 grams | 3 % | |||||
229.8 grams | ||||||
47.5 grams | 2 % | |||||
69.0 grams | 2 % | |||||
85.0 grams | 2 % | |||||
103.5 grams | 2 % | |||||
126.3 grams | 1 % | |||||
154.6 grams | 1 % | |||||
161.9 grams |
General comments (publicly viewable) (Max 1000 characters): CA-10-27
Test was verified on 11/3/2023 ✔