Summary for Test 2023-10-17-27-2
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 994330 DEA: 09366404 EFIS: 0916000006 |
|---|---|
| DIST-CO-RTE-PM | 09-MNO-395-58.2/60.4 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | HOT MIX ASPHALT (TYPE A), IMPORTED BORROW, AND ROADWAY EXCAVATION. |
| Location Description | MONO COUNTY ABOUT 6 MILES NORTH OF LEE VINING FROM ROUTE 167 TO 0.4 MILE NORTH OF CONWAY RANCH ROAD |
| QA Service Level | 1 (Verified on 07/31/2023) |
Sample Information
| Sample Taken Date | 10/17/2023 | Sample Unique Key | 27 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/18/2023 |
| Sample type | Quality Assurance | A brief description of the sample | Con Aggs |
| The quantity of what the sample constitutes | Con Aggs - 1 Bag of 3/4" / 1 Bag of 3/8" / 1 Bag of Wash Sand | From where was the sample collected | Source |
| First name of sampler or witnessed by | Jeff | Last name of sampler or witnessed by | Puente |
| Title of sampler | QA | Telephone number of sampler | 6614400636 |
| Laboratory sample identification | Con Aggs 02 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Mammoth Ready Mix | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | DS-1 Headwall Inlet |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-03-0011 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile @ Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
| The concrete mix design number | 1325.18.25.A | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-10-17-27
DIME Test ID: 2023-10-17-27-2
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-10-20
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Derek Carrington
Date of test: 10/20/2023
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 100 %
Cumulative percent passing the 3/8 in. sieve: 100 %
Cumulative percent passing the #4 sieve: 97 %
Cumulative percent passing the #8 sieve: 71 %
Cumulative percent passing the #16 sieve: 49 %
Cumulative percent passing the #30 sieve: 29 %
Cumulative percent passing the #50 sieve: 12 %
Cumulative percent passing the #100 sieve: 5 %
Cumulative percent passing the #200 sieve: 2.3 %
General comments (publicly viewable) (Max 1000 characters): Con Sand 01
Test was verified on 10/20/2023 ✔