Summary for Test 2023-10-09-8-11
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 994102 DEA: 11430644 EFIS: 1119000045 |
---|---|
DIST-CO-RTE-PM | 11-SD-905-12.0 |
Award Date | 10/28/2022 |
Closeout Date | Not set |
Work Description | CONSTRUCT WEIGH-IN-MOTION FACILITY, CRCP, HMA, AND RETAINING WALL. |
Location Description | SAN DIEGO COUNTY NEAR SAN DIEGO AT OTAY MESA COMMERCIAL VEHICLE ENFORCEMENT FACILITY |
QA Service Level | 1 (Verified on 08/24/2022) |
Sample Information
Sample Taken Date | 10/09/2023 | Sample Unique Key | 8 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/10/2023 |
Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA PSU |
The quantity of what the sample constitutes | 12 boxes 3 bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Jesse | Last name of sampler or witnessed by | Fuentes |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 8305-PSU | Linked DIME Sample ID | 2023-10-09-06 |
The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | N/A |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Stockpile @ Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-10-09-8
DIME Test ID: 2023-10-09-8-11
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-10-31
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Shawn Rivers
Date of test: 10/13/2023
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
9048 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
537.0 grams | 94 % | |||||
2193.0 grams | 76 % | |||||
3625.0 grams | 60 % | |||||
5838.0 grams | 35 % | |||||
511 grams | ||||||
84.2 grams | 29 % | |||||
183.4 grams | 22 % | |||||
277.1 grams | 16 % | |||||
370.7 grams | 10 % | |||||
427.8 grams | 6 % | |||||
455.7 grams | 3.8 % | |||||
459.1 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/31/2023 ✔