Summary for Test 2023-10-09-30-3
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 215240 DEA: 021H6804 EFIS: 0216000010 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-5-39/41.9 |
| Award Date | 02/13/2023 |
| Closeout Date | Not set |
| Work Description | SB Cottonwood Scales |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 10/23/2020) |
Sample Information
| Sample Taken Date | 10/09/2023 | Sample Unique Key | 30 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/09/2023 |
| Sample type | Production Start-Up | A brief description of the sample | 16 boxes of Lime Treated 1/2-inch Type A HMA (eq. PG 64-28 M) with 25.0% RAP and virgin PG 58-34 M binder from Valero (Benicia, CA) |
| The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | D79370 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Tullis - Northstate Asphalt (Redding, CA) | Transportation Laboratory (TL) Number | 853406 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-10-09-30
DIME Test ID: 2023-10-09-30-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2023-10-26
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 10/10/2023
Test procedure used?: Method A
Mass of the specimen basket assembly: 3016.2 g
Mass of the specimen and specimen basket assembly prior to ignition: 4589.1 g
Mass of HMA Sample prior to ignition: 1572.9 g
Mass Loss: 101.1 g
Mass of aggregate remaining after ignition: 1471.8 g
Correction Factor (Percent by mass of HMA Specimen): 0.75 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.19 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 5.49 %
General comments (publicly viewable) (Max 1000 characters): Pb=5.49%
Test was verified on 10/26/2023 ✔