Summary for Test 2017-03-14-2-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 88888
DEA: STOCK
EFIS: STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date03/14/2017 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/15/2017
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes1 From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberNA
Inspector Lot Number from the Transportation Laboratory (TL) FormN/A Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0517167
Manufacturer(s)Watson Bowman Temperature72
Humidity45 CommentsUnknown
Joint Seal Size3.75

Test Details

DIME Sample ID: 2017-03-14-2
DIME Test ID: 2017-03-14-2-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-04-10

Test Results


Input Type: Measured
Tester's full name: Fred
Date of test: 03/21/2017
UTM: 11KIP
Temperature: 72 ?F
Humidity: 52 %
Load at W1: 54.908 lbs
Width at 4 x Load at W1: 1.54257 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.938 in
Measured Minimum Uncompressed Width: 3.76 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.826 in
Height of Contact Face: 3.402 in
Spec Minimum Uncompressed Width: 3.76 in
Area (5 Times of the Height of Contact Face): 17.01 sqin
Half of the Spec Minimum Uncompressed Width: 1.913 in
85 Percent of the Spec Minimum Uncompressed Width: 3.196 in
3 Times of the Area: 51.03 sqin
4 Times of the Load at W1: 219.632 in
W1 (US Units):3.196 in
W1 (Metric Units):81.178 millimeters
W2 (US Units):1.543 in
W2 (Metric Units):39.181 millimeters
Satisfactory of MR of (US Units):1.653 in
Satisfactory of MR of (Metric Units):41.997 millimeters
Optional W1 Measurement 1:3.196 in
Optional W1 Measurement 2:51.3702 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point File
Test graph for 2017-03-14-2-1

Test was verified on 4/3/2017