Summary for Test 2023-08-26-11-6
Test performed: CTM 389-19Project Information
Project Identifiers | Project ID: 993287 DEA: 112T35U4 EFIS: 1121000195 |
---|---|
DIST-CO-RTE-PM | 11-SD-5-R37.4/R52.6 |
Award Date | Not set |
Closeout Date | Not set |
Work Description | CMSTPL-6211(148) I-5 N Coast Corridor HOV Extension Carlsbad |
Location Description | IN SAN DIEGO COUNTY AT VARIOUS LOCATIONS FROM LOMAS SANTA FE DRIVE UNDERCROSSING TO 0.2 MILES NORTH OF OCEANSIDE BOULEVARD UNDERCROSSING |
QA Service Level | 1 (Verified on 09/23/2021) |
Sample Information
Sample Taken Date | 08/26/2023 | Sample Unique Key | 11 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/14/2023 |
Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA |
The quantity of what the sample constitutes | 12 boxes 4 bags | From where was the sample collected | Source |
First name of sampler or witnessed by | N/A | Last name of sampler or witnessed by | N/A |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 5211-PSU | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/4 inch | Lot number | |
Sublot number | HMA Mix Number | 220817 Otay Val |
Test Details
DIME Sample ID: 2023-08-26-11
DIME Test ID: 2023-08-26-11-6
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2023-10-30
Test Results
Specified number of passes at 12.7 mm: 15000
Input Type: Measured
Tester's full name: Daniel Smith
Date of test: 10/11/2023
Test Temperature: 122 F
HMA Production: Lab
Compaction Method: SGC Cylindrical Specimen
Binder High PG Grade: no data
Binder Content TWM: no data
Air Void Content: no data
Aggregate Gradation: no data
Type and Amount of Anti-Stripping Additive: N/A
Stripping Inflection Point (Wheel A): >15000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 1.1 mm
Maximum impression at 5000 passes (right wheel): 2.47 mm
Average impression at 5000 passes (left/right avg): 1.79 mm
Maximum impression at 10000 passes (left wheel): 1.42 mm
Maximum impression at 10000 passes (right wheel): 2.47 mm
Average impression at 10000 passes (left/right avg): 1.95 mm
Maximum impression at 15000 passes (left wheel): 1.89 mm
Maximum impression at 15000 passes (right wheel): 3.28 mm
Average impression at 15000 passes (left/right avg): 2.59 mm
Maximum impression at 20000 passes (left wheel): no data
Maximum impression at 20000 passes (right wheel): no data
Average impression at 20000 passes (left/right avg): no data
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
Raw Data: no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/30/2023 ✔