Summary for Test 2023-09-11-41-1
Test performed: ASTM C39-21Project Information
| Project Identifiers | Project ID: 993834 DEA: 081N0304 EFIS: 0822000082 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-179.4 |
| Award Date | 09/07/2022 |
| Closeout Date | 05/15/2024 |
| Work Description | MONUMENT SIGN AESTHETICS. |
| Location Description | SAN BERNARDINO COUNTY NEAR PRIMM AT CALIFORNIA AGRICULTURAL INSPECTION STATION |
| QA Service Level | 1 (Verified on 10/24/2022) |
Sample Information
| Sample Taken Date | 09/11/2023 | Sample Unique Key | 41 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/14/2023 |
| Sample type | Quality Assurance | A brief description of the sample | Concrete Cylinders |
| The quantity of what the sample constitutes | 6 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Sergio | Last name of sampler or witnessed by | Avila |
| Title of sampler | ASR | Telephone number of sampler | |
| Laboratory sample identification | 1052-1 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Gunner Concrete | Transportation Laboratory (TL) Number | 081N030420230911 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Concrete | The concrete mix design number | 144 |
|---|---|---|---|
| The truck number from where the sample was collected | 22 05 | The batch plant ticket number from where the sample was collected | Not Provided |
| Concrete batch plant | Gunner | The fabricator/manufacturer designation for the sample | Gunner Concrete |
| A detailed description of where the material sample was collected | Monument Sign Foundation | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-09-11-41
DIME Test ID: 2023-09-11-41-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: ASTM C39-21: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2023-10-11
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Measured
Tester's full name: Matthew Clayton
Date of test: 10/09/2023
Apparent mass of submerged cylinder 1: 0 lb
Average diameter of cylinder 1: 4.01 in
Average diameter of cylinder 2: 4.01 in
Average diameter of cylinder 3: 4.00 in
Maximum load on cylinder 1: 21340 lb
Maximum load on cylinder 2: 21320 lb
Maximum load on cylinder 3: 20875 lb
Type of fracture pattern of cylinder 1: 1
Type of fracture pattern of cylinder 2: 1
Type of fracture pattern of cylinder 3: 2
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Correction factor for cylinder 3: 1.00
Age of specimen: 28 days
Age of specimen in hours: 0 hours
Cross sectional area of cylinder 1: 12.63 in^2
Cross sectional area of cylinder 2: 12.63 in^2
Cross sectional area of cylinder 3: 12.57 in^2
Compressive strength of cylinder 1: 1690.0 psi
Compressive strength of cylinder 2: 1690.0 psi
Compressive strength of cylinder 3: 1660 psi
Compressive strength (to nearest 10 psi): 1680 psi
Serial number of delivery ticket, if available: no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/11/2023 ✔