Summary for Test 2023-09-29-19-1
Test performed: CTM 524-March 2013Project Information
| Project Identifiers | Project ID: 994780 DEA: 070W3304 EFIS: 0721000265 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-10-19.5/29.5 |
| Award Date | 06/30/2023 |
| Closeout Date | Not set |
| Work Description | LOS ANGELES COUNTY FROM EVERGREEN AVENUE PEDESTRIAN OVERCROSSING IN LOS ANGELES TO VALLEY BOULEVARD UNDERCROSSING IN EL MONTE |
| Location Description | DIGOUTS, SLURRY SEAL, COLD PLANE OVERLAY, |
| QA Service Level | 1 (Verified on 06/07/2023) |
Sample Information
| Sample Taken Date | 09/29/2023 | Sample Unique Key | 19 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/29/2023 |
| Sample type | Department Acceptance | A brief description of the sample | 6X6X21 Rapid Set Concrete Beams |
| The quantity of what the sample constitutes | 130 CY | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Dominique | Last name of sampler or witnessed by | Mcgee |
| Title of sampler | g3 quality technician | Telephone number of sampler | |
| Laboratory sample identification | 23-1511 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | SLC | Transportation Laboratory (TL) Number | NA |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Concrete | The concrete mix design number | CTS 65-EHI |
|---|---|---|---|
| The truck number from where the sample was collected | 11 | The batch plant ticket number from where the sample was collected | NA |
| Concrete batch plant | SLC | The fabricator/manufacturer designation for the sample | |
| A detailed description of where the material sample was collected | truck chute | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-09-29-19
DIME Test ID: 2023-09-29-19-1
Testing Lab: CT D07 - Materials Field Laboratory, Unit 1953
Test Method: CTM 524-March 2013: Method of Test for Flexural Strength Of Rapid Strength Concrete
Test Release Date: 2023-10-02
Test Results
Number of specimens: 3
Does the testing machine measure load or stress on the beam specimen?: Load
Fracture initiates in the tension surface: Within the Middle Third of the Span Length
Fracture occurred at a capped section: No
Is a beam dimensional correction factor used?: Yes
Input Type: Measured
Tester's full name: Robert Achuela
Date of test: 10/02/2023
Identification number: 1
Width of specimen: 6.0625 inch
Width of specimen 2: 6.0625 inch
Width of specimen 3: 6.0625 inch
Depth of specimen: 6.0625 inch
Depth of specimen 2: 6.0625 inch
Depth of specimen 3: 6.0625 inch
Span length of specimen: 18 inch
Span length of specimen 2: 18 inch
Span length of specimen 3: 18 inch
Maximum load applied: 8924 lb
Maximum load applied 2: 8638 lb
Maximum load applied 3: 8310 lb
Correction Factor: 1
Correction Factor 2: 1
Correction Factor 3: 1
Curing history and apparent moisture condition of the specimen: Damp
If specimen was capped, ground or if leather shims were used: No
Defects in specimen, including numbers of beams discarded during test: None
Age of specimen: 3 days
Age of specimen in hours: 0 hours
Modulus of rupture: 760 psi
Modulus of rupture 2: 730 psi
Modulus of rupture 3: 700 psi
Modulus of rupture average: 730 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/2/2023 ✔