Summary for Test 2023-07-13-35-3
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 994549 DEA: 032G5204 EFIS: 0321000235 |
|---|---|
| DIST-CO-RTE-PM | 03-NEV,PLA,SIE-20,49,80-VAR |
| Award Date | 05/22/2023 |
| Closeout Date | 05/03/2024 |
| Work Description | PLACE POLYESTER CONCRETE OVERLAY AND REPLACE JOINT SEALS. |
| Location Description | NEVADA, PLACER AND SIERRA COUNTIES AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 05/15/2023) |
Sample Information
| Sample Taken Date | 07/13/2023 | Sample Unique Key | 35 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/14/2023 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can |
| The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 17076245467 |
| Laboratory sample identification | 943814 | Linked DIME Sample ID | 943814 |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 1479999 |
|---|---|---|---|
| Batch number | 1479999 | Mix number | 1479999 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-07-13-35
DIME Test ID: 2023-07-13-35-3
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2023-10-02
Test Results
Number of specimens tested: 4
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 07/20/2023
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.489 in
Sample 1 Thickness: 0.246 in
Sample 1 Area: 0.1203 in^2
Sample 1 Ultimate Strength Actual: 999 lbs
Sample 1 percent elongation: 23.6 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.49 in
Sample 2 Thickness: 0.245 in
Sample 2 Area: 0.1201 in^2
Sample 2 Ultimate Strength Actual: 1007 lbs
Sample 2 percent elongation: 21.4 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.49 in
Sample 3 Thickness: 0.244 in
Sample 3 Area: 0.1196 in^2
Sample 3 Ultimate Strength Actual: 1003 lbs
Sample 3 percent elongation: 20.2 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.489 in
Sample 4 Thickness: 0.249 in
Sample 4 Area: 0.1218 in^2
Sample 4 Ultimate Strength Actual: 1018 lbs
Sample 4 percent elongation: 25.2 %
Sample 4 Time: 0 MM:SS
Sample 1 Ultimate strength: 8304.2 psi
Sample 2 Ultimate strength : 8384.7 psi
Sample 3 Ultimate strength: 8386.3 psi
Sample 4 Ultimate strength: 8358 psi
Ultimate Strength Average: 8358 psi
Percent Elongation Average: 23 %
General comments (publicly viewable) (Max 1000 characters): Accepted vendor's results.
Test was verified on 10/2/2023 ✔