Summary for Test 2023-09-18-66-1
Test performed: CTM 212-May 2010Project Information
Project Identifiers | Project ID: 215157 DEA: 021H5704 EFIS: 0216000036 |
---|---|
DIST-CO-RTE-PM | 02-SHA-299-67.8/77.8 |
Award Date | 02/09/2023 |
Closeout Date | Not set |
Work Description | BURNEY CAPM - PAVEMENT REHABILITATION |
Location Description | BUNCH GRASS LOOKOUT RD TO NAPA LN |
QA Service Level | 1 (Verified on 09/03/2020) |
Sample Information
Sample Taken Date | 09/18/2023 | Sample Unique Key | 66 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/19/2023 |
Sample type | Department Acceptance | A brief description of the sample | Shoulder Backing |
The quantity of what the sample constitutes | from 2000 cy to Entire Project | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | D79352 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Pacway - Cassel | Transportation Laboratory (TL) Number | 857916 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Pacway |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Stockpile | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1-1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-09-18-66
DIME Test ID: 2023-09-18-66-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 212-May 2010: Method of Test for Unit Weight of Aggregate
Test Release Date: 2023-10-02
Test Results
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 09/27/2023
Weight of water in the measure: 21.053 lbm
Water temperature: 73 deg F
Tare weight of empty measure: 12.983 lbm
Weight of measure filled with aggregate (test 1): 47.674 lbm
Weight of measure filled with aggregate (test 2): 47.253 lbm
Weight of measure filled with aggregate (test 3): 47.472 lbm
Water density: 62.28 lbf/ft^3
Factor F: 2.96 ft^-3
Net weight of aggregate in measure (test 1): 34.69 lbm
Net weight of aggregate in measure (test 2): 34.27 lbm
Net weight of aggregate in measure (test 3): 34.49 lbm
Average net weight of aggregate required to fill the measure: 34.48 lbm
Aggregate unit weight: 102.01 lbf/ft^3
General comments (publicly viewable) (Max 1000 characters): UW=102pcf
Test was verified on 10/2/2023 ✔