Summary for Test 2023-09-21-53-4
Test performed: AASHTO T275-07r12Project Information
Project Identifiers | Project ID: 993192 DEA: 024H4404 EFIS: 0218000119 |
---|---|
DIST-CO-RTE-PM | 02-PLU-70-0.0/29.9 |
Award Date | 02/10/2022 |
Closeout Date | Not set |
Work Description | CONSTRUCT SOLDIER PILE RETAINING WALL, REPAIR RSP AND HMA PAVING. |
Location Description | PLUMAS COUNTY AT VARIOUS LOCATIONS FROM BUTTE COUNTY LINE TO 3.1 MILES WEST OF ROUTE 89 |
QA Service Level | 1 (Verified on 08/23/2021) |
Sample Information
Sample Taken Date | 09/21/2023 | Sample Unique Key | 53 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/22/2023 |
Sample type | Production Start-Up | A brief description of the sample | 16 boxes of Lime Treated 1/2-inch Type A HMA (PG 64-28 M) with 15.0% RAP and virgin binder from Marathon PNAC (Fernley, NV) |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Dawn | Last name of sampler or witnessed by | Sloaterman |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | D79356 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Q&D Construction - Mustang Hot Plant (Sparks, NV) | Transportation Laboratory (TL) Number | 823626 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 1/2 inch | Lot number | |
Sublot number | HMA Mix Number |
Test Details
DIME Sample ID: 2023-09-21-53
DIME Test ID: 2023-09-21-53-4
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2023-10-05
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Josh Murphy
Date of test: 09/26/2023
Mass of the dry specimen in air: 4702.4 g
Mass of the dry specimen plus paraffin coating in air: 4749.7 g
Mass of the dry specimen plus paraffin coating in water: 2720.9 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4703.9 g
Mass 2 of the dry specimen plus paraffin coating in air: 4756.3 g
Mass 2 of the dry specimen plus paraffin coating in water: 2721.9 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4702.1 g
Mass 3 of the dry specimen plus paraffin coating in air: 4753.0 g
Mass 3 of the dry specimen plus paraffin coating in water: 2722.3 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.379
Bulk Specific Gravity 2: 2.380
Bulk Specific Gravity 3: 2.382
Average Bulk Specific Gravity: 2.38
General comments (publicly viewable) (Max 1000 characters): Gmb=2.381
Test was verified on 10/5/2023 ✔