Summary for Test 2023-08-18-57-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 994254 DEA: 120R2904 EFIS: 1218000076 |
---|---|
DIST-CO-RTE-PM | 12-ORA-22-R5.5 |
Award Date | 11/09/2022 |
Closeout Date | 05/02/2024 |
Work Description | PLACE HIGH FRICTION SURFACE TREATMENT, LOOP DETECTORS, MGS AND CB. |
Location Description | ORANGE COUNTY IN GARDEN GROVE AT WESTBOUND BROOKHURST STREET ON-RAMP AND OFF-RAMP |
QA Service Level | 1 (Verified on 01/10/2023) |
Sample Information
Sample Taken Date | 08/18/2023 | Sample Unique Key | 57 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/21/2023 |
Sample type | Verification | A brief description of the sample | PSUE 3/4" RHMA-G-SP 0.5% EVO |
The quantity of what the sample constitutes | 4 Bags Of Combined Aggregate | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | R J Noble | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0424G-23 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | R J Noble Orange | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0035 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt Cut at R J Noble Orange Plant | |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | 49R003ARSPWEO | Lot number | |
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-08-18-57
DIME Test ID: 2023-08-18-57-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-10-17
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Calculated
Tester's full name: Satish Jain/RG
Date of test: 08/25/2023
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 98 %
Cumulative percent passing the 1/2 in. sieve: 84 %
Cumulative percent passing the 3/8 in. sieve: 67 %
Cumulative percent passing the #4 sieve: 28 %
Cumulative percent passing the #8 sieve: 17 %
Cumulative percent passing the #16 sieve: 12 %
Cumulative percent passing the #30 sieve: 8 %
Cumulative percent passing the #50 sieve: 5 %
Cumulative percent passing the #100 sieve: 4 %
Cumulative percent passing the #200 sieve: 2.9 %
General comments (publicly viewable) (Max 1000 characters): Combined Virgin Aggregate Gradation
Test was verified on 10/17/2023 ✔