Summary for Test 2023-06-21-64-2
Test performed: AASHTO T335-09r13Project Information
Project Identifiers | Project ID: 213811 DEA: 112T2184 EFIS: 1116000174 |
---|---|
DIST-CO-RTE-PM | 11-SD-5-R38.4/R47.3 |
Award Date | 10/29/2018 |
Closeout Date | 01/03/2024 |
Work Description | (Alternative Delivery) Construct HOV lanes, soundwalls, culvert rehab, ITS, and bike trail on I-5 . NCC I-5 Highway Improvement. |
Location Description | IN SAN DIEGO COUNTY IN ENCINITAS AND CARLSBAD FROM SAN ELIJO LAGOON BRIDGE TO 0.3 MILE NORTH OF PALOMAR AIRPORT ROAD OVERCROSSING. |
QA Service Level | 1 (Verified on 12/19/2018) |
Sample Information
Sample Taken Date | 06/21/2023 | Sample Unique Key | 64 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/22/2023 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" RHMA-G |
The quantity of what the sample constitutes | 12 boxes 3 bags | From where was the sample collected | Source |
First name of sampler or witnessed by | MARCO | Last name of sampler or witnessed by | ESTUDILLO |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Martin Marietta | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0036 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Aggregates | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-06-21-64
DIME Test ID: 2023-06-21-64-2
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Test Release Date: 2023-09-19
Test Results
Method: 1 - Combined Fracture Determination
Aggregate Size and Fracture Type: Coarse 2 Faced and Fine 1 Faced
Input Type: Measured
Tester's full name: Melchor Oronoz
Date of test: 07/14/2023
Mass of fractured, coarse, 2 faced particles tested: 710.5 g
Mass of questionable, coarse, 2 faced particles tested: 0 g
Mass of unfractured, coarse, 2 faced particles tested: 2.9 g
Mass of fractured, fine, 1 faced particles tested: 89 g
Mass of questionable, fine, 1 faced particles tested: 0 g
Mass of unfractured, fine, 1 faced particles tested: 0 g
Percentage of questionable, coarse, 2 faced particles tested: 0 %
Percentage of questionable, fine, 1 faced particles tested: 0 %
Percentage of fractured, coarse, 2 faced particles tested: 100 %
Percentage of fractured, fine, 1 faced particles tested: 100 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/19/2023 ✔