Summary for Test 2023-06-21-63-6
Test performed: CTM 389-19Project Information
Project Identifiers | Project ID: 213811 DEA: 112T2184 EFIS: 1116000174 |
---|---|
DIST-CO-RTE-PM | 11-SD-5-R38.4/R47.3 |
Award Date | 10/29/2018 |
Closeout Date | 01/03/2024 |
Work Description | (Alternative Delivery) Construct HOV lanes, soundwalls, culvert rehab, ITS, and bike trail on I-5 . NCC I-5 Highway Improvement. |
Location Description | IN SAN DIEGO COUNTY IN ENCINITAS AND CARLSBAD FROM SAN ELIJO LAGOON BRIDGE TO 0.3 MILE NORTH OF PALOMAR AIRPORT ROAD OVERCROSSING. |
QA Service Level | 1 (Verified on 12/19/2018) |
Sample Information
Sample Taken Date | 06/21/2023 | Sample Unique Key | 63 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/22/2023 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" RHMA-G |
The quantity of what the sample constitutes | 12 boxes 3 bags | From where was the sample collected | Source |
First name of sampler or witnessed by | MARCO | Last name of sampler or witnessed by | ESTUDILLO |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Vulcan Carroll Canyon | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/4 inch | Lot number | |
Sublot number | HMA Mix Number | 21218080 |
Test Details
DIME Sample ID: 2023-06-21-63
DIME Test ID: 2023-06-21-63-6
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2023-09-19
Test Results
Specified number of passes at 12.7 mm: 20000
Input Type: Measured
Tester's full name: Melchor Oronoz
Date of test: 08/04/2023
Test Temperature: 122 F
HMA Production: Field Plant Produced
Compaction Method: SGC Cylindrical Specimen
Type and Amount of Anti-Stripping Additive: 0.5%
Stripping Inflection Point (Wheel A): >20000
Stripping Inflection Point (Wheel B): >12500
Maximum impression at 5000 passes (left wheel): 1.22 mm
Maximum impression at 5000 passes (right wheel): 1.15 mm
Average impression at 5000 passes (left/right avg): 1.19 mm
Maximum impression at 10000 passes (left wheel): 1.52 mm
Maximum impression at 10000 passes (right wheel): 1.26 mm
Average impression at 10000 passes (left/right avg): 1.39 mm
Maximum impression at 15000 passes (left wheel): 1.68 mm
Maximum impression at 15000 passes (right wheel): 1.36 mm
Average impression at 15000 passes (left/right avg): 1.52 mm
Maximum impression at 20000 passes (left wheel): 1.82 mm
Maximum impression at 20000 passes (right wheel): 1.47 mm
Average impression at 20000 passes (left/right avg): 1.65 mm
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/19/2023 ✔