Summary for Test 2023-09-12-53-1
Test performed: CTM 231-March 2013Project Information
Project Identifiers | Project ID: 993664 DEA: 073311U4 EFIS: 0719000098 |
---|---|
DIST-CO-RTE-PM | 07-VEN-23,101-R3.3/R3.7,0.2/40.8 |
Award Date | 08/31/2022 |
Closeout Date | Not set |
Work Description | CONSTRUCT GUARDRAILS AND CONCRETE BARRIER. |
Location Description | VENTURA COUNTY IN THOUSAND OAKS, CAMARILLO, OXNARD AND VENTURA ON ROUTE 101 FROM THE LOS ANGELES /VENTURA COUNTY LINE TO OLD PACIFIC COAST HIGHWAY AND ON ROUTE 23 FROM ROUTE 23/101 SEPARATION TO HILLCREST DRIVE |
QA Service Level | 1 (Verified on 05/11/2022) |
Sample Information
Sample Taken Date | 09/12/2023 | Sample Unique Key | 53 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/12/2023 |
Sample type | Quality Assurance | A brief description of the sample | 1218 sqft |
The quantity of what the sample constitutes | 1218 sqft | From where was the sample collected | Source |
First name of sampler or witnessed by | Manuel | Last name of sampler or witnessed by | Uy |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 23-1406 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | n/a | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | n/a |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | CTM 231 Test Holes | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-09-12-53
DIME Test ID: 2023-09-12-53-1
Testing Lab: Alta Vista Solutions - Whittier
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Test Release Date: 2023-09-17
Test Results
Method Type:: Standard Count
Number of Tests:: 3
Common Test Maximum Used:: No
Input Type: Measured
Tester's full name: SoCal Reports
Date of test: 09/12/2023
Gage No.: no data
Test No.: no data
Nuclear By: no data
Non-Bias Plan No.: no data
Depth: no data
Material No.: no data
Material Type: no data
Impact By: no data
Standard Count Density: 3043 g/cc
Count or Density 1: 5467 g/cc
Count or Density 2: 5008 g/cc
Count or Density 3: 5083 g/cc
Standard Count Moisture: 1084 g/cc
Moisture Count 1: 337 g/cc
Moisture Count 2: 381 g/cc
Moisture Count 3: 334 g/cc
Sum of Count or Density: 15558.00 g/cc
Average of Count or Density: 5186.00 g/cc
Sum of Moisture Count: 1052.00 g/cc
Average of Moisture Count: 351.00 g/cc
Count Ratio Density: 1.70
Count Ratio Moisture: 0.32
Calculated Percent Relative Compaction: 97.2 %
Reported Percent Relative Compaction: 97 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/17/2023 ✔