Summary for Test 2023-08-15-70-4
Test performed: AASHTO T313-22Project Information
Project Identifiers | Project ID: 993192 DEA: 024H4404 EFIS: 0218000119 |
---|---|
DIST-CO-RTE-PM | 02-PLU-70-0.0/29.9 |
Award Date | 02/10/2022 |
Closeout Date | Not set |
Work Description | CONSTRUCT SOLDIER PILE RETAINING WALL, REPAIR RSP AND HMA PAVING. |
Location Description | PLUMAS COUNTY AT VARIOUS LOCATIONS FROM BUTTE COUNTY LINE TO 3.1 MILES WEST OF ROUTE 89 |
QA Service Level | 1 (Verified on 08/23/2021) |
Sample Information
Sample Taken Date | 08/15/2023 | Sample Unique Key | 70 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/25/2023 |
Sample type | Acceptance | A brief description of the sample | PG 64-28M |
The quantity of what the sample constitutes | 1 OF 2 | From where was the sample collected | Job Site |
First name of sampler or witnessed by | NA | Last name of sampler or witnessed by | NA |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Q&D CONSTRUCTION | Transportation Laboratory (TL) Number | 79330 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 64-28 M |
---|---|---|---|
Modified | Lot number | ||
Sublot number | Tank number | ||
Time of sample | HMA Supplier | ||
Certified Asphalt Supplier | Paramount Nevada Asphalt(PNAC) LLC - Fernley NV | Multigrade | No |
Multigrade Type | Asphalt Binder Mix Number |
Test Details
DIME Sample ID: 2023-08-15-70
DIME Test ID: 2023-08-15-70-4
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2023-09-13
Test Results
Input Type: Measured
Tester's full name: Humberto Ramirez
Date of test: 09/13/2023
Minimum test bath temperature at 240 s: -18.0 C
Maximum test bath temperature at 240 s: -18.0 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 0.0 mN
Beam deflection 60.0 s: 0.000 µm
Measured Stiffness Modulus 60.0 s: 95.500 mPa
Estimated Stiffness Modulus 60.0 s: 95.500 mPa
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.339
General comments (publicly viewable) (Max 1000 characters): BBR
Test was verified on 9/13/2023 ✔