Summary for Test 2023-08-02-80-6
Test performed: AASHTO T335-09r13Project Information
Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 08/02/2023 | Sample Unique Key | 80 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/17/2023 |
Sample type | Verification | A brief description of the sample | Aggregate |
The quantity of what the sample constitutes | 4 Bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Erik | Last name of sampler or witnessed by | Svensson |
Title of sampler | Consultant | Telephone number of sampler | |
Laboratory sample identification | 23-JMFPP-0157 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Granite Construction | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-39-0002 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 1073 | The fabricator/manufacturer designation for the sample | |
The plant number | A detailed description of where the material sample was collected | HMA Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-08-02-80
DIME Test ID: 2023-08-02-80-6
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Test Release Date: 2023-08-30
Test Results
Method: 1 - Combined Fracture Determination
Aggregate Size and Fracture Type: Coarse 1 and 2 Faced and Fine 1 Faced
Input Type: Measured
Tester's full name: Ryan Kester
Date of test: 08/29/2023
Mass of fractured, coarse, 2 faced particles tested: 667.8 g
Mass of questionable, coarse, 2 faced particles tested: 33.6 g
Mass of unfractured, coarse, 2 faced particles tested: 16.5 g
Mass of fractured, coarse, 1 faced particles tested: 703.1 g
Mass of questionable, coarse, 1 faced particles tested: 11.7 g
Mass of unfractured, coarse, 1 faced particles tested: 3.1 g
Mass of fractured, fine, 1 faced particles tested: 25.9 g
Mass of questionable, fine, 1 faced particles tested: 0 g
Mass of unfractured, fine, 1 faced particles tested: 0 g
Percentage of questionable, coarse, 2 faced particles tested: 5 %
Percentage of questionable, coarse, 1 faced particles tested: 2 %
Percentage of questionable, fine, 1 faced particles tested: 0 %
Percentage of fractured, coarse, 2 faced particles tested: 95 %
Percentage of fractured, coarse, 1 faced particles tested: 99 %
Percentage of fractured, fine, 1 faced particles tested: 100 %
General comments (publicly viewable) (Max 1000 characters): Crushed particles, coarse aggregate one fractured face Crushed particles, coarse aggregate two fractured faces Crushed particles, fine aggregate (Passing No. 4 sieve and retained on No. 8 sieve) one fractured face.
Test was verified on 8/30/2023 ✔