Summary for Test 2023-07-06-36-11
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 993409 DEA: 07327604 EFIS: 0716000132 |
---|---|
DIST-CO-RTE-PM | 07-LA-39-32.2/38.4 |
Award Date | 03/07/2022 |
Closeout Date | Not set |
Work Description | INSTALL GUARDRAILS AND CONSTRUCT RETAINING WALLS. |
Location Description | LOS ANGELES COUNTY NEAR AZUSA AT VARIOUS LOCATIONS FROM 0.3 MILE SOUTH OF NORTH FORK SAN GABRIEL RIVER OVERCROSSING TO 0.3 MILE NORTH CRYSTAL LAKE ROAD |
QA Service Level | 1 (Verified on 12/06/2021) |
Sample Information
Sample Taken Date | 07/06/2023 | Sample Unique Key | 36 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/13/2023 |
Sample type | Verification | A brief description of the sample | PSUE 3/4" HMA-A-SP R15 0.5% LAS |
The quantity of what the sample constitutes | 4 Bags Of Agg., 2 Bags Of Rap | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Jons | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0363A-23 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Materials-Irwindale | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt Cut at Vulcan Materials-Irwindale | |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | 220831A IRW LTR | Lot number | |
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-07-06-36
DIME Test ID: 2023-07-06-36-11
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2023-10-04
Test Results
Input Type: Measured
Tester's full name: Amir Behjati
Date of test: 07/15/2023
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 973.2 grams
Mass of the pycnometer with water (B): 660.4 grams
Mass of the oven dried sample (before pycnometer) (A): 491 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 491 grams
Test Sample Preparation: 6% Moisture
Bulk specific gravity: 2.623
Bulk specific gravity (SSD Basis): 2.671
Apparent specific gravity: 2.755
Absorption: 1.8 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/4/2023 ✔