Summary for Test 2023-06-19-37-10
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 994825 DEA: 070W3204 EFIS: 0721000258 |
---|---|
DIST-CO-RTE-PM | 07-LA-164-4.8/6.9 |
Award Date | 04/03/2023 |
Closeout Date | 01/11/2024 |
Work Description | CONSTRUCTION ON STATE HIGHWAY IN LOS ANGELES COUNTY FROM GARY AVENUE IN SOUTH EL MONTE TO RUDELL UNDERPASS IN TEMPLE CITY |
Location Description | 07-LA-164-4.8/6.9 |
QA Service Level | 1 (Verified on 07/24/2023) |
Sample Information
Sample Taken Date | 06/19/2023 | Sample Unique Key | 37 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/21/2023 |
Sample type | Verification | A brief description of the sample | PSUE 3/4" HMA-A-SP=R15 No LAS |
The quantity of what the sample constitutes | 3 Bags Of Combined Agg., 1 Bag Rap | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Gerardo | Last name of sampler or witnessed by | Zubieta |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0328A-23 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | All American Asphalt-Irwindale | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0005 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt Cut at All American Asphalt Irwindale Plant | |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | 105793 | Lot number | |
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-06-19-37
DIME Test ID: 2023-06-19-37-10
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2023-09-19
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: Yes
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Satish Jain/Larry Diaz
Date of test: 06/28/2023
Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 95 %
Cumulative percent passing the 1/2 in. sieve: 83 %
Cumulative percent passing the 3/8 in. sieve: 68 %
Cumulative percent passing the #4 sieve: 44 %
Cumulative percent passing the #8 sieve: 32 %
Cumulative percent passing the #16 sieve: 22 %
Cumulative percent passing the #30 sieve: 15 %
Cumulative percent passing the #50 sieve: 9 %
Cumulative percent passing the #100 sieve: 6 %
Cumulative percent passing the #200 sieve: 4.2 %
General comments (publicly viewable) (Max 1000 characters): Comb. Virgin Agg., Gradation W/Rap Gradation Correlation Factors
Test was verified on 9/19/2023 ✔