Summary for Test 2023-06-14-90-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 994386 DEA: 023J7404 EFIS: 0222000079 |
---|---|
DIST-CO-RTE-PM | 02-LAS-395-92.0/98.5 |
Award Date | 01/04/2023 |
Closeout Date | 04/11/2024 |
Work Description | HMA OVERLAY, REPLACE AC SURFACING AND RECESSED THERMOPLASTIC STRIPE. |
Location Description | LASSEN COUNTY ABOUT 16 MILES SOUTH OF RAVENDALE FROM 0.1 MILE NORTH OF KARLO ROAD TO 1.5 MILES SOUTH OF RAMHORN ROAD |
QA Service Level | 1 (Verified on 03/28/2023) |
Sample Information
Sample Taken Date | 06/14/2023 | Sample Unique Key | 90 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/15/2023 |
Sample type | Verification | A brief description of the sample | 2 bags of Untreated 1/2-inch Sized Virgin Aggregate |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Source |
First name of sampler or witnessed by | Andrea | Last name of sampler or witnessed by | Sloaterman |
Title of sampler | TET | Telephone number of sampler | 5306044726 |
Laboratory sample identification | D79266A | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Hat Creek Construction and Materials - Ward Lake Pit - Litchfield, CA | Transportation Laboratory (TL) Number | 858028 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-18-0008::Ward Lake Pit |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Untreated Sized Aggregate Stockpile | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-06-14-90
DIME Test ID: 2023-06-14-90-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-08-08
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Josh Ferency
Date of test: 06/16/2023
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2496.8 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
301.6 grams | 88 % | |||||
1917.9 grams | 23 % | |||||
2463.1 grams | 1 % | |||||
2466.9 grams | 1 % | |||||
2468.1 grams | 1 % | |||||
2469.2 grams | 1 % | |||||
2470.1 grams | 1 % | |||||
2470.9 grams | 1 % | |||||
2472.3 grams | 1 % | |||||
2474.2 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/8/2023 ✔