Summary for Test 2023-07-17-25-4
Test performed: AASHTO T313-22Project Information
| Project Identifiers | Project ID: 212496 DEA: 024E4504 EFIS: 0200020286 |
|---|---|
| DIST-CO-RTE-PM | 02-LAS,MOD-139,299-VAR |
| Award Date | 07/28/2020 |
| Closeout Date | 08/14/2023 |
| Work Description | PLACE HMA, REPLACE DRAINAGE, CULVERT, ELECTRICAL AND LIGHTING SYSTEMS. |
| Location Description | LASSEN AND MODOC COUNTIES ON ROUTE 139 AT 0.1 MILE NORTH OF LASSEN COUNTY LINE AND ON ROUTE 299 AT VARIOUS LOCATONS FROM 0.4 MILE WEST OF BOYD HILL LOOKOUT ROAD TO 0.6 MILE EAST OF COUNTY ROAD 87 |
| QA Service Level | 1 (Verified on 06/06/2017) |
Sample Information
| Sample Taken Date | 07/17/2023 | Sample Unique Key | 25 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/25/2023 |
| Sample type | Department Acceptance | A brief description of the sample | PG 58-22 |
| The quantity of what the sample constitutes | 2 of 2 cans | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Randy | Last name of sampler or witnessed by | NA |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Hat Creek - Ward Lake | Transportation Laboratory (TL) Number | D79300 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-22 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | ||
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-07-17-25
DIME Test ID: 2023-07-17-25-4
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2023-08-08
Test Results
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 08/08/2023
Minimum test bath temperature at 240 s: -12.1 C
Maximum test bath temperature at 240 s: -11.9 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 988.0 mN
Beam deflection 60.0 s: 0.953 µm
Measured Stiffness Modulus 60.0 s: 83.600 mPa
Estimated Stiffness Modulus 60.0 s: 83.600 mPa
Difference between stiffness moduli 60.0 s: 0.00 %
Estimated m-value 60.0 s: 0.347
General comments (publicly viewable) (Max 1000 characters): BBR
Test was verified on 8/8/2023 ✔