Summary for Test 2023-06-14-87-1
Test performed: AASHTO T308-10Project Information
Project Identifiers | Project ID: 994345 DEA: 023J7804 EFIS: 0222000083 |
---|---|
DIST-CO-RTE-PM | 02-TRI-36-15.8/16.9,20.5/24.5 |
Award Date | 12/22/2022 |
Closeout Date | 08/22/2023 |
Work Description | PLACE HOT MIX ASPHALT (TYPE A) AND REPLACE ASPHALT CONCRETE SURFACING. |
Location Description | TRINITY COUNTY NEAR FOREST GLEN FROM 1.1 MILES WEST OF SOUTH FORK TRINITY RIVER BRIDGE TO SOUTH FORK TRINITY RIVER BRIDGE NO. 05-0026 AND FROM UPPER RATTLESNAKE CREEK BRIDGE NO. 05-0073 TO 0.3 MILE WEST OF TRINITY PINES ROAD |
QA Service Level | 1 (Verified on 03/28/2023) |
Sample Information
Sample Taken Date | 06/14/2023 | Sample Unique Key | 87 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/14/2023 |
Sample type | Production Start-Up | A brief description of the sample | 16 boxes of Lime Treated 3/8-inch Type A HMA (eq. PG 64-28 M) with 24.0% RAP and virgin PG 58-34 M binder from Valero - Benicia |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | JD | Last name of sampler or witnessed by | Atkinson |
Title of sampler | Tester | Telephone number of sampler | |
Laboratory sample identification | D79265 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Tullis - Northstate Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 858117 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/8 inch | Lot number | |
Sublot number | HMA Mix Number |
Test Details
DIME Sample ID: 2023-06-14-87
DIME Test ID: 2023-06-14-87-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2023-08-08
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Sean McWithey
Date of test: 08/04/2023
Test procedure used?: Method A
Mass of the specimen basket assembly: 3062.1 g
Mass of the specimen and specimen basket assembly prior to ignition: 4266.1 g
Mass of HMA Sample prior to ignition: 1204.0 g
Mass Loss: 83.8 g
Mass of aggregate remaining after ignition: 1120.2 g
Correction Factor (Percent by mass of HMA Specimen): 0.63 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.25 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 6.08 %
General comments (publicly viewable) (Max 1000 characters): Pb=6.08%
Test was verified on 8/8/2023 ✔