Summary for Test 2023-06-14-85-1
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 994345 DEA: 023J7804 EFIS: 0222000083 |
|---|---|
| DIST-CO-RTE-PM | 02-TRI-36-15.8/16.9,20.5/24.5 |
| Award Date | 12/22/2022 |
| Closeout Date | 08/22/2023 |
| Work Description | PLACE HOT MIX ASPHALT (TYPE A) AND REPLACE ASPHALT CONCRETE SURFACING. |
| Location Description | TRINITY COUNTY NEAR FOREST GLEN FROM 1.1 MILES WEST OF SOUTH FORK TRINITY RIVER BRIDGE TO SOUTH FORK TRINITY RIVER BRIDGE NO. 05-0026 AND FROM UPPER RATTLESNAKE CREEK BRIDGE NO. 05-0073 TO 0.3 MILE WEST OF TRINITY PINES ROAD |
| QA Service Level | 1 (Verified on 03/28/2023) |
Sample Information
| Sample Taken Date | 06/14/2023 | Sample Unique Key | 85 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/14/2023 |
| Sample type | Production Start-Up | A brief description of the sample | 2 bags of Fine RAP (3/8-inch) |
| The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | JD | Last name of sampler or witnessed by | Atkinson |
| Title of sampler | Tester | Telephone number of sampler | |
| Laboratory sample identification | D79264B | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Tullis - Northstate Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 858118 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | Tullis, Northstate Asphalt, Redding, CA |
|---|---|---|---|
| Aggregate Size | 3/8-inch | Aggregate Source | |
| RAP Stockpile | Stockpile Size (tons) | ||
| Reclaimed Asphalt Pavement Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-06-14-85
DIME Test ID: 2023-06-14-85-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2023-08-03
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 06/16/2023
Test procedure used?: Method A
Mass of the specimen basket assembly: 3036.5 g
Mass of the specimen and specimen basket assembly prior to ignition: 4322.9 g
Mass of HMA Sample prior to ignition: 1286.4 g
Mass Loss: 85.2 g
Mass of aggregate remaining after ignition: 1201.2 g
Correction Factor (Percent by mass of HMA Specimen): 0.00 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.23 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 6.39 %
General comments (publicly viewable) (Max 1000 characters): Pbr(uncorrected)=6.39%,
Pbr≈5.48%
Test was verified on 8/3/2023 ✔