Summary for Test 2023-05-16-62-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 994266 DEA: 070W3604 EFIS: 0722000007 |
---|---|
DIST-CO-RTE-PM | 07-LA-14,126-R30.9,R4.1 |
Award Date | 11/16/2022 |
Closeout Date | Not set |
Work Description | POLYESTER CONCRETE OVERLAY AND JOINT SEAL REPLACEMENT. |
Location Description | LOS ANGELES COUNTY NEAR SANTA CLARITA ON ROUTE 14 AT VIA PRINCESSA UNDERCROSSING AND ON ROUTE 126 AT CASTAIC CREEK BRIDGE. |
QA Service Level | 1 (Verified on 10/06/2022) |
Sample Information
Sample Taken Date | 05/16/2023 | Sample Unique Key | 62 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/05/2023 |
Sample type | Verification | A brief description of the sample | 2 Bags of each Bin Agg. (1,2,3,4), 1 Bag of RAP: |
The quantity of what the sample constitutes | PSUE 1/2" WMA-A-SP R15 0.25% EVO | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Thomas | Last name of sampler or witnessed by | Shivens QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0293A-23 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Sun Valley | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0046 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt Cut at Vulcan Materials Sun Valley | |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | 320914 SVA LTR | Lot number | |
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-05-16-62
DIME Test ID: 2023-05-16-62-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-09-07
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Calculated
Tester's full name: M.Campos/M. L
Date of test: 06/13/2023
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 98 %
Cumulative percent passing the 3/8 in. sieve: 87 %
Cumulative percent passing the #4 sieve: 57 %
Cumulative percent passing the #8 sieve: 35 %
Cumulative percent passing the #16 sieve: 21 %
Cumulative percent passing the #30 sieve: 13 %
Cumulative percent passing the #50 sieve: 8 %
Cumulative percent passing the #100 sieve: 5 %
Cumulative percent passing the #200 sieve: 2.7 %
General comments (publicly viewable) (Max 1000 characters): Combined Virgin Aggregate Gradation
Test was verified on 9/7/2023 ✔