DIME - Test Summary

Summary for Test 2023-04-04-25-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 993442 DEA: 07323304 EFIS: 0716000063
DIST-CO-RTE-PM	07-LA-60-R28.0/R30.4
Award Date	Not set
Closeout Date	Not set
Work Description	INSTALL DPP INFILTRATION AND CONSTRUCT MAINTENANCE VEHICLE PULLOUT.
Location Description	LOS ANGLES COUNTY IN POMONA AT VARIOUS LOCATIONS FROM PHILLIPS RANCH ROAD OVERCROSSING TO 0.1 MILE EAST OF RESERVOIR STREET UNDERCROSSING
QA Service Level	1 (Verified on 12/16/2021)

Sample Taken Date	04/04/2023	Sample Unique Key	25
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/10/2023
Sample type	Verification	A brief description of the sample	PSUE 3/4" HMA-SP R15 0.5% LAS
The quantity of what the sample constitutes	6 Bags Of Agg., 2 Bags Of Rap	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Vulcan	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0197A-23	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Materials-Irwindale	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0035
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Vulcan Materials-Irwindale
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	220831A IRW LTR	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-04-04-25

DIME Test ID: 2023-04-04-25-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-07-27

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 04/12/2023

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 967.9 grams

Mass of the pycnometer with water (B): 653.4 grams

Mass of the oven dried sample (before pycnometer) (A): 494.4 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 494.4 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.665

Bulk specific gravity (SSD Basis): 2.695

Apparent specific gravity: 2.748

Absorption: 1.1 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/27/2023 ✔