Summary for Test 2023-04-26-59-1
Test performed: AASHTO T209-22Project Information
| Project Identifiers | Project ID: 214640 DEA: 042J7204 EFIS: 0415000016 |
|---|---|
| DIST-CO-RTE-PM | 04-CC-580-1.17 |
| Award Date | 02/25/2021 |
| Closeout Date | 12/01/2023 |
| Work Description | STEGE DRAIN SUPER-STRUCTURE, PRECAST VOIDED SLABS |
| Location Description | CONTRA COSTA COUNTY IN RICHMOND FROM 0.3 MILE EAST OF STEGE DRAIN BRIDGE TO 0.3 MILE WEST OF BAYVIEW AVENUE OVERCROSSING |
| QA Service Level | 1 (Verified on 01/27/2020) |
Sample Information
| Sample Taken Date | 04/26/2023 | Sample Unique Key | 59 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/28/2023 |
| Sample type | Quality Assurance | A brief description of the sample | 1/2 HMA Type A |
| The quantity of what the sample constitutes | 4 boxes | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Mathew | Last name of sampler or witnessed by | James |
| Title of sampler | QC Technician | Telephone number of sampler | 14152694285 |
| Laboratory sample identification | Rich_23_132 | Linked DIME Sample ID | 2023-04-26-40 |
| The fabricator/manufacturer/facility name | Dutra Materials Richmond | Transportation Laboratory (TL) Number | C727215 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | 1 | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | 1 |
| Sublot number | 1 | HMA Mix Number | MD 6653 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-04-26-59
DIME Test ID: 2023-04-26-59-1
Testing Lab: CT D04 - Richmond Field Laboratory
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2023-07-27
Test Results
Number of Samples: 2
What is the unit of measurement for theoretical density?: SI Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Anthony Ibarra
Date of test: 04/27/2023
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water 1: 7371.8 grams
Mass of oven-dry sample in air for Sample 1: 1625.6 grams
Mass of container filled with the sample and water for Sample 1: 8336.6 grams
Mass of container filled with water 2: 7371.8 grams
Mass of oven-dry sample in air for Sample 2: 1628.7 grams
Mass of container filled with the sample and water for Sample 2: 8338.5 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.460
Specific Gravity for Sample 2: 2.460
Average Specific Gravity: 2.460
Theoretical maximum density at 25°C (77°F): 2452.9 kg/m^3
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/27/2023 ✔