Summary for Test 2023-04-15-2-2

Test performed: AASHTO T308-10

Project Information

Project IdentifiersProject ID: 993386
DEA: 060R1904
EFIS: 0614000057
COOP: 061783
DIST-CO-RTE-PM06-KER-184,223-L0.0/L0.3,R15.7/R16.3
Award Date01/25/2022
Closeout Date04/08/2024
Work DescriptionCONSTRUCT ROUNDABOUT, CURB RAMPS, AND LIGHTING SYSTEMS.
Location DescriptionKERN COUNTY NEAR ARVIN ON ROUTE 184 FROM ROUTE 223 TO 0.3 MILE NORTH OF ROUTE 223 AND ON ROUTE 223 FROM 0.3 MILE WEST OF ROUTE 184 TO 0.3 MILE EAST OF ROUTE 184
QA Service Level1 (Verified on 11/15/2021)

Sample Information

Sample Taken Date04/15/2023 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/17/2023
Sample typeDepartment Acceptance A brief description of the sample3/4 HMA Type A PG 64-10
The quantity of what the sample constitutes10 boxes HMA type A , 4 bags of aggregate From where was the sample collectedManufacturer
First name of sampler or witnessed byPaul Last name of sampler or witnessed byKlinker
Title of samplerMaterials Tester Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameGriffith Edmonston Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number1
Sublot number28 HMA Mix NumberGRF21G38

Test Details

DIME Sample ID: 2023-04-15-2
DIME Test ID: 2023-04-15-2-2
Testing Lab: CT D06 - Bakersfield Field Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2023-04-17

Test Results


What temperature unit is used?: Fahrenheit
Input Type: Measured
Tester's full name: James Watson
Date of test: 04/17/2023
Test procedure used?: Method A
Mass of the specimen basket assembly: 3900.6 g
Mass of the specimen and specimen basket assembly prior to ignition: 6068 g
Mass of HMA Sample prior to ignition: 2167.4 g
Mass Loss: 109.2 g
Mass of aggregate remaining after ignition: 2058.2 g
Correction Factor (Percent by mass of HMA Specimen): 0.43 %
Moisture Content: 0 %
Temperature Compensation Factor: 0 %
Test Temperature: 538 F
Corrected Asphalt Binder Content: 4.61 %
General comments (publicly viewable) (Max 1000 characters): L1SL 28

Test File Attachments

File NameExtensionFile SizeDate UploadedTest IDActions
06_0R1904_37039_230417_L1SL28_T308pdf19.49 KB04/17/20232023-04-15-2-2   Info

Test was verified on 4/17/2023