DIME - Test Summary

Summary for Test 2023-04-07-17-1

Test performed: CTM 202-November 2011

Project Identifiers	Project ID: 215336 DEA: 051G9804 EFIS: 0516000009
DIST-CO-RTE-PM	05-SLO-1-10.0/16.8
Award Date	12/19/2022
Closeout Date	Not set
Work Description	RHMA (GAP GRADED), RETAINING WALL, CURB RAMPS AND LIGHTING SYSTEMS.
Location Description	SAN LUIS OBISPO COUNTY FROM GRACIA WAY AT OCEANO TO ROUTE 1/101 SEPARATION IN PISMO BEACH.
QA Service Level	1 (Verified on 11/18/2020)

Sample Taken Date	04/07/2023	Sample Unique Key	17
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/07/2023
Sample type	Acceptance	A brief description of the sample	Shoulder Backing
The quantity of what the sample constitutes	Stockpile.	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Isaac	Last name of sampler or witnessed by	Gleffe
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	CalPortland Rocky Canyon	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-40-0013
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Stockpile at the Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-04-07-17

DIME Test ID: 2023-04-07-17-1

Testing Lab: CT D05 - Santa Maria Field Laboratory

Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates

Test Release Date: 2023-10-09

What size aggregate is being tested?: Combined Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

For Combined Gradation only, has the fine aggregate sample been reduced?: Yes

For Combined Gradation only, use #40 Sieve?: No

Input Type: Calculated

Tester's full name: Isaac Gleffe

Date of test: 04/11/2023

Cumulative percent passing the 3 in. sieve: 100 %

Cumulative percent passing the 2 1/2 in. sieve: 100 %

Cumulative percent passing the 2 in. sieve: 100 %

Cumulative percent passing the 1 1/2 in. sieve: 100 %

Cumulative percent passing the 1 in. sieve: 100 %

Cumulative percent passing the 3/4 in. sieve: 96 %

Cumulative percent passing the 1/2 in. sieve: 85 %

Cumulative percent passing the 3/8 in. sieve: 70 %

Cumulative percent passing the #4 sieve: 50 %

Cumulative percent passing the #8 sieve: 73 %

Cumulative percent passing the #16 sieve: 53 %

Cumulative percent passing the #30 sieve: 39 %

Cumulative percent passing the #50 sieve: 30 %

Cumulative percent passing the #100 sieve: 23 %

Cumulative percent passing the #200 sieve: 18 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/9/2023 ✔