Summary for Test 2023-03-07-10-1
Test performed: CTM 231-March 2013Project Information
| Project Identifiers | Project ID: 993607 DEA: 07322604 EFIS: 0716000057 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-210-R41.3/R44.6 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | CONSTRUCT POLLUTION INFILTRATION AREAS AND AUSTIN VAULT SAND FILTER. |
| Location Description | LOS ANGELES COUNTY IN GLENDORA AT VARIOUS LOCATIONS FROM 0.2 MILE EAST OF BARRANCA AVENUE OVERCROSSING TO 0.1 MILE WEST OF AMELIA AVENUE UNDERCROSSING |
| QA Service Level | 1 (Verified on 05/11/2022) |
Sample Information
| Sample Taken Date | 03/07/2023 | Sample Unique Key | 10 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/07/2023 |
| Sample type | Quality Assurance | A brief description of the sample | Aggregate Base |
| The quantity of what the sample constitutes | 3360 square feet | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Ruben | Last name of sampler or witnessed by | Lopez |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 23-0232 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | n/a | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | n/a |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | CTM 231 Test Holes | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-03-07-10
DIME Test ID: 2023-03-07-10-1
Testing Lab: Alta Vista Solutions - Whittier
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Test Release Date: 2023-03-09
Test Results
Method Type:: Direct Read
Number of Tests:: 3
Common Test Maximum Used:: No
Input Type: Measured
Tester's full name: Ruben Lopez
Date of test: 03/07/2023
Gage No.: 34188
Test No.: 1
Nuclear By: Ruben Lopez
Non-Bias Plan No.: 2
Depth: 9
Material No.: Aggregate Base
Material Type: Aggregate Base
Impact By: Ruben Lopez
Standard Count Density: 1703 g/cc
Count or Density 1: 647 g/cc
Count or Density 2: 809 g/cc
Count or Density 3: 715 g/cc
Standard Count Moisture: 668 g/cc
Moisture Count 1: 166 g/cc
Moisture Count 2: 160 g/cc
Moisture Count 3: 179 g/cc
Sum of Count or Density: 2171.00 g/cc
Average of Count or Density: 723.67 g/cc
Sum of Moisture Count: 505.00 g/cc
Average of Moisture Count: 168.33 g/cc
Calculated Percent Relative Compaction: 97.7 %
Reported Percent Relative Compaction: 98 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/9/2023 ✔