Summary for Test 2023-01-30-3-1
Test performed: AASHTO T27-14
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 01/30/2023 | Sample Unique Key | 3 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/02/2023 |
Sample type | Verification | A brief description of the sample | Aggregate |
The quantity of what the sample constitutes | 4 Bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Erik | Last name of sampler or witnessed by | Svensson |
Title of sampler | Consultant | Telephone number of sampler | |
Laboratory sample identification | 23-JMFPP-0011 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Granite Construction | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-39-0002 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 1073 | The fabricator/manufacturer designation for the sample | |
The plant number | A detailed description of where the material sample was collected | HMA Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-01-30-3
DIME Test ID: 2023-01-30-3-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-02-09
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Jay Horton
Date of test: 02/08/2023
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2408.1 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
43.3 grams | 98 % | |||||
258.1 grams | 89 % | |||||
931.3 grams | 61 % | |||||
916.7 grams | ||||||
390.2 grams | 35 % | |||||
594.8 grams | 21 % | |||||
703.3 grams | 14 % | |||||
774.5 grams | 9 % | |||||
819.0 grams | 7 % | |||||
844.0 grams | 4.8 % | |||||
847.1 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/9/2023 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.