Summary for Test 2022-10-25-74-2
Test performed: ASTM C39-21Project Information
Project Identifiers | Project ID: 993333 DEA: 04264724 EFIS: 0419000068 |
---|---|
DIST-CO-RTE-PM | 04-MRN-101-R20.8/27.1 |
Award Date | 04/26/2022 |
Closeout Date | Not set |
Work Description | CIP BRIDGES, CONSTRUCT ROADWAY, RETAINING WALLS AND MODIFY ELECTRICAL. |
Location Description | MARIN COUNTY IN AND NEAR NOVATO FROM 0.1 MILE SOUTH OF FRANKLIN AVENUE OVERHEAD TO 0.5 MILE SOUTH OF SAN ANTONIO CREEK BRIDGE |
QA Service Level | 1 (Verified on 11/01/2021) |
Sample Information
Sample Taken Date | 10/25/2022 | Sample Unique Key | 74 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/26/2022 |
Sample type | Quality Control | A brief description of the sample | SL4201CG |
The quantity of what the sample constitutes | 18 | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Irwin | Last name of sampler or witnessed by | McMath |
Title of sampler | Field Technician | Telephone number of sampler | |
Laboratory sample identification | S22-065 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Shamrock Materials Petaluma | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name | inverts and walls |
Material Information
Material Type | Concrete | The concrete mix design number | SL-4201CG |
---|---|---|---|
The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | 429502 | |
Concrete batch plant | Shamrock Petaluma | The fabricator/manufacturer designation for the sample | SL-4201CG |
A detailed description of where the material sample was collected | back of truck | Where the material sample would have been placed if not sampled | inverts and walls |
From Lot No. | Bag Lot No. |
Test Details
DIME Sample ID: 2022-10-25-74
DIME Test ID: 2022-10-25-74-2
Testing Lab: Pavement Engineers
Test Method: ASTM C39-21: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2022-12-11
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Calculated
Tester's full name: Michelle Holub
Date of test: 11/22/2022
Capped in accordance with?: no data
Apparent mass of submerged cylinder 1: 0 lb
Average diameter of cylinder 1: 4.00 in
Average diameter of cylinder 2: 4.00 in
Average diameter of cylinder 3: 4.00 in
Maximum load on cylinder 1: 93940 lb
Maximum load on cylinder 2: 96885 lb
Maximum load on cylinder 3: 101660 lb
Type of fracture pattern of cylinder 1: 2
Type of fracture pattern of cylinder 2: 2
Type of fracture pattern of cylinder 3: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Correction factor for cylinder 3: 1.00
Age of specimen: 28 days
Age of specimen in hours: no data
Cross sectional area of cylinder 1: 12.57 in^2
Cross sectional area of cylinder 2: 12.57 in^2
Cross sectional area of cylinder 3: 12.57 in^2
Compressive strength (to nearest 10 psi): 7760 psi
Serial number of delivery ticket, if available: 429502
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/11/2022 ✔