Summary for Test 2022-11-22-23-1

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 993239
DEA: 100P5404
EFIS: 1013000251
DIST-CO-RTE-PM10-SJ,STA-5,99-6.2/6.6,R17.7/R18.1
Award Date10/29/2021
Closeout Date08/30/2023
Work DescriptionREMOVE & PLACE STRUCTURAL CONCRETE BRIDGE; AND PLACE CONCRETE BARRIER.
Location DescriptionSAN JOAQUIN AND STANISLAUS COUNTIES ON ROUTE 5 FROM 0.2 MILE SOUTH TO 0.2 MILE NORTH OF ROUTE 5/33 SEPARATION AND OVERHEAD AND ON ROUTE 99 FROM 0.2 MILE SOUTH TO 0.2 MILE NORTH OF WEST MODESTO OVERHEAD
QA Service Level1 (Verified on 09/27/2021)

Sample Information

Sample Taken Date11/22/2022 Sample Unique Key23
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing11/22/2022
Sample typeQuality Control A brief description of the sample1 x 4 PCC Aggregate
The quantity of what the sample constitutes100 cy From where was the sample collectedJob Site
First name of sampler or witnessed byAdrian Last name of sampler or witnessed byRodriguez
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameCemex Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-50-0026
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedStockpile
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number1615645 Lot number
Sublot number Aggregate Mix Number

Test Details

DIME Sample ID: 2022-11-22-23
DIME Test ID: 2022-11-22-23-1
Testing Lab: RMA Group - Rancho Cordova
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2022-11-28

Test Results


What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Todd Strait
Date of test: 11/23/2022
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 98 %
Cumulative percent passing the 3/4 in. sieve: 85 %
Cumulative percent passing the 1/2 in. sieve: 52 %
Cumulative percent passing the 3/8 in. sieve: 29 %
Cumulative percent passing the #4 sieve: 7 %
Cumulative percent passing the #8 sieve: 4 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 11/28/2022