Summary for Test 2002-10-31-1-1
Test performed: AASHTO T315-22
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
Project Identifiers | Project ID: 993650 DEA: 09388604 EFIS: 0921000036 |
---|---|
DIST-CO-RTE-PM | 09-INY-395-102.4/113.0 |
Award Date | 05/11/2022 |
Closeout Date | 01/30/2023 |
Work Description | COLD PLANE AC PAVEMENT AND PLACE HMA (TYPE A). |
Location Description | INYO COUNTY NEAR BIG PINE FROM 0.2 MILE NORTH OF REYNOLDS ROAD TO 0.1 MILE NORTH OF WARM SPRINGS ROAD |
QA Service Level | 1 (Verified on 03/28/2022) |
Sample Information
Sample Taken Date | 10/31/2002 | Sample Unique Key | 1 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/14/2022 |
Sample type | Acceptance | A brief description of the sample | PG64-28M |
The quantity of what the sample constitutes | 1 qt can | From where was the sample collected | Job Site |
First name of sampler or witnessed by | RHB | Last name of sampler or witnessed by | _ |
Title of sampler | Oiler | Telephone number of sampler | |
Laboratory sample identification | Linked DIME Sample ID | 2022-10-31-53 | |
The fabricator/manufacturer/facility name | Suncore Energy | Transportation Laboratory (TL) Number | 663726 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 64-28 M |
---|---|---|---|
Modified | Yes | Lot number | |
Sublot number | Tank number | ||
Time of sample | HMA Supplier | ||
Certified Asphalt Supplier | Suncor Energy - Tooele UT | Multigrade | No |
Multigrade Type | Asphalt Binder Mix Number |
Test Details
DIME Sample ID: 2002-10-31-1
DIME Test ID: 2002-10-31-1-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2022-11-28
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Erika Gonzalez
Date of test: 11/22/2022
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.226 kPa
Phase Angle (δ) (for the 10 cycles): 70.4 degree
Complex Modulus (G*) (for the 10 measurements): 1.883 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 2.00 kPa
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/28/2022 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.