Summary for Test 2022-08-31-58-4
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 993603 DEA: 051N7004 EFIS: 0521000081 |
---|---|
DIST-CO-RTE-PM | 05-SLO-166-16.0/21.0 |
Award Date | 04/22/2022 |
Closeout Date | 03/28/2023 |
Work Description | PARTIAL DEPTH RECYCLING AND OVERLAY WITH RHMA (GAP GRADED). |
Location Description | SAN LUIS OBISPO COUNTY ABOUT 8 MILES EAST OF SANTA MARIA FROM 0.5 MILE WEST OF HUASNA RIVER BRIDGE TO 1.9 MILES WEST OF CUYAMA RIVER BRIDGE. |
QA Service Level | 1 (Verified on 03/28/2022) |
Sample Information
Sample Taken Date | 08/31/2022 | Sample Unique Key | 58 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/19/2022 |
Sample type | Dispute Resolution | A brief description of the sample | Aggregate |
The quantity of what the sample constitutes | L1SL16 | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Isaac | Last name of sampler or witnessed by | Gleffe |
Title of sampler | ARET | Telephone number of sampler | 18053191237 |
Laboratory sample identification | 22-JMFD-0155 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | SPM-Templeton | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-10-0006 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Source | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | 1 | |
Sublot number | 16 | Aggregate Mix Number |
Test Details
DIME Sample ID: 2022-08-31-58
DIME Test ID: 2022-08-31-58-4
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2022-10-24
Test Results
Input Type: Measured
Tester's full name: Ryan Kester
Date of test: 10/21/2022
Mass of saturated surface dry sample (before pycnometer) (S): 500.2 grams
Mass of the pycnometer with water and aggregate (C): 969.2 grams
Mass of the pycnometer with water (B): 662.2 grams
Mass of the oven dried sample (before pycnometer) (A): 485.9 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500.2 grams
Mass of the oven dry aggregate (for absorption) (A): 485.9 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.515
Bulk specific gravity (SSD Basis): 2.589
Apparent specific gravity: 2.716
Absorption: 2.9 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/24/2022 ✔