Summary for Test 2016-05-19-8-7
Test performed: CONCLP 3-16Project Information
Project Identifiers | Project ID: 210756 DEA: 043G4034 EFIS: 0412000101 |
---|---|
DIST-CO-RTE-PM | 04-CC,SOL-80-13.4/14.1,0.0/0.6 |
Award Date | 01/05/2016 |
Closeout Date | 12/21/2017 |
Work Description | RESURFACE BRIDGE , INSTALL NEW JOINT SEAL.. |
Location Description | IN CONTRA COSTA AND SOLANO COUNTIESON THE CARQUINEZ BRIDGE (1958) |
QA Service Level | 1 (Verified on 09/15/2015) |
Sample Information
Sample Taken Date | 05/19/2016 | Sample Unique Key | 8 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/19/2016 |
Sample type | Quality Control | A brief description of the sample | polyester resin |
The quantity of what the sample constitutes | 40000 lbs | From where was the sample collected | Source |
First name of sampler or witnessed by | Unknown | Last name of sampler or witnessed by | Unknown |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | reichhold | Transportation Laboratory (TL) Number | c240494 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Polyester | Mfg. Lot Number(s) | 0000975313 |
---|---|---|---|
Batch number | 0000975313 | Mix number |
Test Details
DIME Sample ID: 2016-05-19-8
DIME Test ID: 2016-05-19-8-7
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: CONCLP 3-16: Polyester Resin
Test Release Date: 2016-09-22
Test Results
Input Type: Measured
Tester's full name: Mike Mullins
Date of test: 09/22/2016
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 195 cps
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.07
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 51.1 %
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 2953 psi
Styrene ASTM D 2369 40% to 50 %: 44 %
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 496 psi
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.6 grams
General comments (publicly viewable) (Max 1000 characters): approved by J.Sagar
Test was verified on 9/22/2016 ✔